Model PEW DH2 Signatures and cover sheets are dropped on a circulating gathering chain and conveyed to the stitching station through the spine from the outside to the inside with the wire staples.
The two stitching heads for stitching with two staples are arranged under a hinged guard. These can be easily set to the thickness of the material to be stitched and to changes of the distance
between the staples. Two exchangeable stapling devices are supplied, one of them for thin and the other one for thicker wire-gauge. After the stitching operation, which can be performed with
staggered or unstaggered position of the staples, the brochures are delivered in imbricated form on a belt delivery. Higher efficiency Auto-feeders Full utilization of the capacity of the gathering
and wire-stitching machine DH2 can be achieved by connecting it with feeders operating according to the roll-off principle. The gathering and wire-stitching Model DH2 can be provided upto 4
Auto-feeders. If the machine is to be used for hand feeding, the feeders have simply to be swivelled back. These feeders are also suitable for polygraph flow lines and can be attached without any
modification. Technical Data Sizes (untrimmed) maximum with non-staggered stitching 350x280 mm maximum with staggered stitching 330x280 mm Minimum 150x100 mm Stapling devices A stitching thickness
0-4 mm, back length 16 mm, leg length 7 mm, for wire nos. 21-24 B stitching thickness 0-2 mm, back length 12 mm, leg length 5 mm for wire nos. 23-26 Distance between staple centres: maximum 220
mmminimum 55 mm Drive 1 kW 3-phase squirrel cage motor 400/440V, 50Hz, 1500 rpm