Technical Information:System : Automatic Machine with a bottle and Conveyor. Number of head : 6 nozzlesFilling products : Any low viscosity liquid Type of bottles : PET or glass bottles in good
condition.Filling heads maaterial : Stainless steel shaft 304 or 316Conveyor height : 850 mm from ground.Water tank : 150 liters with automatic cut out Buoyancy deviceWater pump : 1.0 horsepower
motor, 220 Volt.Coveyor : non stainable stainless conveyor, top Chine type, 3.0 meters longConveyor gesr : 1.0 horsepower motor, 220 or 380 Volt.Air pressure : 60-80 pounds per sq.inches.220/380
VoltsSafety : Pnluemetic system with 24 VDX. Stopping The machine at anytimeDimension : 750*750*2200 mm. W*L*H Description:This is an in-line, Fully automatic, 6 nozzles filling machine for
drinking water or any other tlyoes of low-viscosity liquid ( such as: soft drinks, alcoholic products, oil, etc.) It is capable of utilizing both glass and rigid plastic bottle of various sizes,
with especially desogned pumping actino to keep the amount of foam forming at the minimum level. During the process, bottle travel along a delivery conveyor and are positioned under the filling
nozzles. When the filling nozzles are deployed, the plug mechanism will seal itself around the bottle mouth before injection, eliminating all the dripping problems those may occur. The machine can
detect the presence of the bottle, if no bottles no fillThe door fram building from arkilic sheed glass.