Roller Die Cutter

Die cutter is designated for cutting out different patterns from hard foils, cardboard and paper. It can also be used for cutting out die stampings, from foils obtained in the vacuum forming process, by means of band punching dies placed on the plywood. It enables the so-called cardboard bending (making incisions) and perforation used in the production of foil and cardboard packing.
We manufacture 6 models with different size of shafts:
WWP06KNA-600mm WW15KNA-1500mm
WWP08KNA-800mm WW18KNA-1800mm
WWP12KNA-1200mm WW25KNA-2500mm
Two types of die cutter shafts are used:
- two steel shafts
- or an upper shaft covered with a special material
Using the first type of shafts, the material that is to be cut out and a separator made of a special plastic is placed on the punching die, which is a very impractical solution for large sizes of cut-out elements.
Using the second type of shafts punching die with a cut-out material is placed directly between die cutter shafts. This method increases the output of the machine.
Die cutter shafts are driven by transmission belt, which enables noiseless and steady work. Tables are equipped with transmission belts placing the punching die between two die cutter shafts.
The machine can be controlled in two ways:
- the first way is to place the punching die between two die cutter shafts manually. This causes the shaft drive to switch on and shifting of the punching die to the other side of the machine. The punching die stops right behind the shafts. There is also the possibility of manual control from operator's desk. In this case the tables are equipped with rolls.
- The other way is to control the machine automatically by means of a modern Mitsubishi controller. In here are three control modes for operator to choose.