MC 1000 MASTER CUP FILLER

Try us for reconditioned machines that we may have traded in. Six months guarantee against faulty parts is given on all reconditioned machines.

From: US$ 20 000.00

Change parts can be supplied for any size up to 1 (one) litre.

3.15 Cup Sizes

Pneumatic lifter with swing arm transfer to accumulator table.

3.14 Cup Ejector

Rim sealer suitable for size interchange. Filler with variable temperature controller.

3.13 Sealer

Pre-cut cap magazine with pneumatic applicator

3.12 Cup Dispenser

Single or double piston fillers with no drip fill valves.

3.11 Fill Unit

3.10 Stand: Stainless steel

3.9 Cabinet : Stainless steel

3.8 Machine Drive: .35 Kw geared motor

The machine can be supplied with a feed tank that holds 70 litres of product. This tank can be supplied with a constant level float and then fed from a bulk tank.

3.7 Feed Tank - Optional Extras

Height : 1 500 mm
Width : 650 mm
Length : 1 400 mm

3.6 Dimensions with Optional Tank

A minimum of daily lubrication is the main requirement. The MASTER CUP FILLER is robust and when adjusted, will run in a trouble-free manner for long periods. The electrical system is simple and can be maintained by a qualified electrician.

3.5 Maintenance

Change of cup dispenser, cup holder and 6 (six) table inserts.

3.4 Cup Size Changing

This is achieved by adjusting the filling stroke of the fill piston.

3.3 Fill Volume Changing

.40 cu.m/hour at 6 bars

3.2 Compressed Air

Single phase 220-240 volts 50 cycles, A.C.

3.1 Electricity Required

The machine is designed for easy quick access to all parts to be cleaned.

2.8 Cleaning

A cup ejector raises the cup at the ejection station and it is then transferred onto the accumulator table.

2.7 Cup Ejection

A temperature controlled universal sealer seals all cups from 250 ml to 1 litre. The sealer is self aligning.

2.6 Sealing

The round cap system. The diaphragm capping system uses pre-cut diaphragm caps that are loaded into a magazine and automatically placed on the cups prior to heat sealing.

2.5. Capping System

25 ml to 175 ml.............................1 900 units/hour
500 ml...........................................1 600 units/hour
1 000 ml .....................................1 400 units/hour

2.4 Speed

2.3 Standard machine is supplied for diameter top size nominated by customer. Change parts for different diameter cups can be supplied for the cup sizes given below.

2.2 Dispenses, seals and fills round cups with 70 mm diameter tops. Adaptors can be supplied for different size tops.

2.1. This is a highly developed machine with computer control for accurate repetition of the various functions and with built in overriding features such as no cup no fill no cap etc.

Designed to fill and seal round or square cups with semi-viscous substances such as yoghurt, fruit yoghurt and cream. Free flowing liquids could also be filled and sealed. Examples are coffee, cream and orange juice.

Reasonably priced low cost fully automatic filler