6.Mitsubishi Frequency Inverters
for driving screw , 3 rollers stack and
hualf-off
7. Temperature control :Temperature rises or lowers by increasing or decreasing voltage and Automatic Cooling
Fans
5.Haul-off unit
Motor:3.7kw, frequency inverter control,3,7kw ,Mitsubishi Frequency Inverter Japan ,Haul-off length 3000mm ,rewindering unit with two Air
shaft and Scrap
Rewinder
c- Diving motor:37kw ,Mitsubishi frequency converter of 37kw ,low noise ,saving
energy
d- Heating : 30kw ,6 heating zones on barrel, air cooling through 6
blowers
e-Blockfeed for A/B or A/B/A type
2.Screen charger
a- Material : 38CrMoAlA high quality alloy steel , nitriding with hydraulic Pump ,Tow performance
station
3. Die
a- Material: carbon constructional quality steel chrome-faced chromized coating.width 800mm,adjustment range
0.2-2.5mm
b-T-shaped ,Clothes bracket flow channel, polished inner mold surface.
4. Calendar of 3 rollers
a- hard-chromed and mirror-finish surface,hardened, 400Dx800L , High Quality .
b- roller lifted pneumatically by cylinder or hydraulically by hydraulic pumpand
thickness micro metrically adjusted by machenical
divce
c- Spiral cooling channel for efficient heat transfer and uniform temperature across the surface of rollers
d- Motor,3.7kw Frequency inverter control ,3.7kw,Mitsubishi Frequency Inverter
Japan
a- Screw: diameter80mm, L/D
:33/1
b- Material of screw and barrel: 38CrMoAlA high quality alloy steel, nitriding0.4-0.5mm
Subsidiary Extruder
d- Diving motor:45kw, Mitsubishi frequency inverter 45kw. Japan.
,
f- Heating :30 kw, 6 heating zones on barrel,air cooling by
blowers,0.06kwx6
CONFIGURATION
1. Extruder and
subsidiary extruder 4. Operatoin
Console
2. Calendar of 3
rollers
5. Hydraulic
pump
3.Single winding
system
6. Haul-off unit
7.Frequency inverter for each indivdual roller (option) 8. Mult Pump system (option)
9.Pressure loop of sensors (Option) 10.PLC and Touch
Screen(option)
Design Feature
1.Extruder
b- Screw: diameter 100mm, L/D 33:1
,
c- Material of screw and barrel: 38CrMoAlA high quality alloy steel, nitriding 0.4-0.5mm
sheet line
sheet line producing roll of double layer PP PS sheet for thermoforming purpose.
Delivery Time: | 3months |
Package: | in wooden case with plastic film and anti-rust oil |
Supply Ability: | 1 Unit/Units per Month |
Minimum Order Quantity: | 1 Set/Sets |
Payment Terms: | L/C,T/T,Western Union |
Port: | ShangHai or NingBo |
Width: | 700mm (or widder ) |
Production: | Double layer PP PS HIPS |
Screw Design: | Single-screw |
Application: | Sheet |
Plastic Processed: | Other |
Model Number: | LX700 double layer |
Brand Name: | LX |
Place of Origin: | Zhejiang China (Mainland) |
Sheet extrusion line refers to the production equipment which is used to heat the plastic raw materials (particles) in the plastic extruder, melt them, and then extrude them into sheets through the mould. Plastic sheet produced by equipment and machine in plastic sheet ...
Come From JWELL Extrusion Machinery Co., Ltd
The PVC sheet extrusion production line of jwell machinery china is divided into hard sheet and plate, mainly as follows: There are two kinds of PVC hard sheets: transparent hard sheet and opaque hard sheet: PVC transparent hard film: Medicine / gift / stationery packaging, led ...
Come From JWELL Extrusion Machinery Co., Ltd
The PS sheet production line of JWELL company is divided intoļ¼ GPPS plate production line: ordinary GPPS plate is mainly used for advertising, decoration, decoration, craft products, specimen signs, etc; Electroplated rear plate is used for vacuum electroplated plastic lens. ...
Come From JWELL Extrusion Machinery Co., Ltd