9000
8000
5500
4000
3500
3000
3000
Net weight(kg)
1300
1300
1300
1150
1000
1000
1000
Center height (mm)
8-80
10-100
11-110
13-130
15-150
18-180
20-200
Screw rotate speed(rpm)
1000-1300
700-900
600-750
450-600
250-400
120-280
80-120
Maxoutput (kg/h)
350
285
185/220
110/185
90/110
45/75/90
22/30
Driving power (kw)
33:1
33:1
33:1
33:1
33:1
33:1
30:1
L/D Ratio
150
120
105
90
75
65
45
Screw diameter(mm)
SJ150/33
SJ120/33
SJ105/33
SJ90/33
SJ75/33
SJ65/33
SJ45/30
Model
Technology parameter
4. Adopt involute gear transmission, low noise, steady operation, large loading, long life and so on.
3. Low energy consumption
2. High output, good plasticization
1. Advanced design,
The machine has below advantages
This machine is mainly used in extruding soft and hard thermoplastics, such as PVC, polyethylene and others. With relevent auxiliary machine (including profile machine head), It can produce several kinds of plastic products,such as film, pipe, board,sheet, hollow product etc. It is also used for granulation.
single extrude machine
1Plasticization well.high yield
2Low consumption, low noise
3Steady operation
Delivery Time: | 20-40days |
Package: | The single extrude machine adopts wooden package |
Supply Ability: | 10 Set/Sets per Month |
Minimum Order Quantity: | 1 Set/Sets |
Payment Terms: | L/C,T/T |
Port: | shanghai |
2The output of single extrude machine: | is from 80 kg/h to1300 kg/h |
1Screw diam.of single extrude machine: | is 45mm to 150mm |
Screw Design: | Single-screw |
Application: | Profile |
Plastic Processed: | PVC |
Model Number: | SJ |
Brand Name: | Longree |
Place of Origin: | Jiangsu China (Mainland) |
What is a Twin-screw Feed Extruder? The H series twin-screw feed extruder is primarily used for the production and processing of various floating, sinking, and slow-sinking aquatic feeds. It can meet various customer demands, including 0.6mm aperture floating and 0.8mm aperture ...
Come From Henan Herm Machinery Co., Ltd.
直径范围:Ø15mm~Ø500mm 长径比:L /D=7~55 材质:38CrMoAIA(41CrAIMo7) 调质硬度: HB280-320 螺杆直线度: 0.015mm 氮化硬度: HV850-1000 氮化深度: 0.45~0.7mm 氮化脆性:2级 表面粗糙度:≤Ra0.4 ...
Come From Hubei Kingz Technology Co., Ltd
PVC is a non-crystalline polymer of polyvinyl chloride. Its glass transition temperature is 105℃-75℃ depending on the molecular weight. It has flame retardancy, high rigidity, excellent chemical resistance, and electrical insulation, but it is a heat-sensitive resin. Its ...
Come From JWELL Extrusion Machinery Co., Ltd
Single Screw Plastic Waste Granulator The single screw waste plastic granulator is mainly suitable for extrusion and granulation of raw materials, which is not only clean or single with stable components and low moisture content, but also has no need for secondary ...
Come From Anhui Guowang Eco Technology Ltd.,
The extruder open screw barrels are used in the feeding section, the natural exhausting section and the vacuum exhausting sections. Depending on the materials produced, the placement of the open barrel is different. The opening shapes of twin barrel screw can be square, ...
Come From NANJING LESUN SCREW CO.,LTD
ScrewBarrel forExtruder There are two maintypes of screw barrel, 4D and 6D, with 4D being the most. According to the different selection of the materials from the customers, the corresponding bushing materials can be selected to meet the needs of the modified customer. ...
Come From NANJING LESUN SCREW CO.,LTD
WITH REGARD TO PRODUCTION SPECIFICATIONS, LESUN NOT ONLY OFFERS STANDARD TWIN SCREW EXTRUDER PARTS MADE BY GENERAL SCREW EXTRUDER MANUFACTURER, BUT ALSO PROVIDES SPECIAL-PURPOSE FEED SCREW DESIGN AND MANUFACTURING SERVICE ACCORDING TO YOUR REQUIREMENTS. MEANWHILE, WE ALSO ...
Come From NANJING LESUN SCREW CO.,LTD
The extruder open screw barrels are used in the feeding section, the natural exhausting section and the vacuum exhausting sections. Depending on the materials produced, the placement of the open barrel is different. The opening shapes of twin screw screw barrel can be square, ...
Come From NANJING LESUN SCREW CO.,LTD
There are two main types of types of screw barrel, 4D and 6D, with 4D being the most. According to the different selection of the materials from the customers, the corresponding bushing materials can be selected to meet the needs of the modified customer. Technical Data of ...
Come From NANJING LESUN SCREW CO.,LTD
WITH REGARD TO PRODUCTION SPECIFICATIONS, LESUN NOT ONLY OFFERS STANDARD TWIN SCREW EXTRUDER PARTS MADE BY GENERAL SCREW EXTRUDER MANUFACTURER, BUT ALSO PROVIDES SPECIAL-PURPOSE feed screw design AND MANUFACTURING SERVICE ACCORDING TO YOUR REQUIREMENTS. MEANWHILE, WE ALSO ...
Come From NANJING LESUN SCREW CO.,LTD