SMC production line

All motors and electrical apparatus at the machine are not in explosion proofed.The control cabinet is not explosion proofed.It has not be installed outside the ex-area.

with doors at operation side.  ON/OFF button, two frequency controllers which separately used to control the belt speed and the cutter speed and t winder are controlled on the operation panel.

17.0 1  sheet metal control cabinet

Taking up of the cardboard cores between left and right take-up heads with pneumatic clamping. Winding of the SMC mats on cardboard cores.

     Weight of the SMC mat rollers:         max. 100

     Diameter of SMC mat rollers:          max. 350 mm

     Diameter of winding axles:          75 mm inside, 93 mm outside

     Working width:                       1000 mm

16.1 1  turret winder

      continuously adjustable frequency controlled motor (380V, 50Hz, performance 3KW)

15.1   main drive

      adjustment of the height by step wedge,counter pressing or lifting off pneumatically

13.1   smoothing roller

       tension roller, for upper impregnation belt

12.1    belt tension device with manual operated

          There are two different modes of operationroller on roller or roller on gap.

          Adjustment of the pressure limitation and of the run-in and run-out angle by hand wheels. The impregnation pressure is made pneumatically and adjustable by a pressure reducer.

          compaction bridge with chain belt as upper impregnation belt and belt guidance. 16 upper and 16 lower impregnation rollers, with manual belt tension.

  11.0  impregnation zone

        Chain belt is made from stainless steel.

  10.0  belt tension device with manual operated

   9.0  belt guidance for lower impregnation belt

   8.0  chain belts as lower transport and impregnation belt

   7.0  adjustable turnaround roller, with variable draw-in angle of the paste-coated upper films are put together to a sandwich (film feeding)

with voltage 380V, 50Hz, performance 1.5KW

-         continuously adjustable frequency controlled motor

-         drop height of the chopped strands 500 mm

-         contact roller, 200 mm, with polyurethane

-         cutter roll 200 mm with  24 spiral grooves for inserted cutter blades in steel

-         working width 1000 mm

   6.0  roving cutter

        doctor blade assembly is made from carbon steel,working surface is electroplated.

       specification identically to doctor blade assembly

   5.0  doctor blade assembly ( upper carrier film)

   4.0  doctor blade assembly ( lower carrier film) with accurate setting the doctor blade gap, doctor blade split, variable 0~3.0 mm, rapid lift off the doctor blade for cleaning

   3.0  spreader rollers, fitted in front of both doctor blade assemblies

   2.1  Film unwinder for upper carrier film with tension controlled, max. diameter film roll 300 mm.

2.0  Film unwinder for lower carrier film with tension controlled, max. diameter film roll 300 mm.

1.0  Machine frame in rectangle tubes

2.    This machine consists of:

A high percentage of glass corresponds to a lower viscosity. A high viscosity corresponds to a lower percentage of glass. A high sheet weight corresponds to a lower working speed.

Note:

Fibre lengths              25 mm

Glass contents            15-35%

Sheet weight              2-5 kg/m²

Production speed         continuously adjustable from 4-12 m/min

Working width            1000 mm

1.    SMC- Sheet making line

we are yuanda chemical machinery factory and specialised in producing chemcial macinery such as the SMC sheet machine kneader machine ,grinding machine,experiencial machine,hot melt glue machines and other chemcial machines and we have dealed with many years in the world market  and enjoy a good reputations in the Eurpopean countries and north America markets and our producing technologys have invited many foreign advanced technologys especially in UK

1.high qualitys
2.duarable in use
3.high advanced technologys
4.ISO9002 inspection system
5.produce SMC sheet