Screw Extruders

E 133 Extruder 133 mm Entek extrusion lineDownload throughput rate sheet E-MAX" twin-screw extruders are designed for maximum flexibility. Taking full advantage of co-rotating technology, ENTEKs screw geometry, metallurgy and manufacturing discipline allow for industry leading material mixing and productivity in multiple areas of processing. The base design, control modularity, multiple L/D choices, high torque/high speed motor and gearbox combinations, and material feed options can be modified to meet or exceed your requirements.[ print ]Extruder Specification SCREWS Diameter 133 mm Rotation Co-Rotating Length 28-48 L/D Screw Center Distance (mm) 110 Screw Do/Di Ratio 1.55 Flight Depth (mm) 23.6 Free Area, 2-Flight (cm2) 101.1 Shafts 24 Tooth Involute Spline BARRELS Form Square, Flanged Length 510 mm Cooling Internal Liquid Cooling Open Barrel Heat Zone 18.8 kW Aluminum24.8 kW Bronze/Cast Iron Closed Barrel Heat Zone 22.5 kW Aluminum34.5 kW Bronze/Cast Iron DRIVE SYSTEM Std. Gearbox Ratios 1.75 / 2.92 / 3.8 / 5.8 Screw Speeds 1000 / 600 / 460 / 300 rpm Motor @ 1750 rpm 4000 / 2500 / 2000 / 1250 hp Motor Equivalent in Watts 2.98 / 1.86 / 1.49 / 0.93 MW Voltage Options 380 / 415 / 460 / 575 Volt Standard Motor Controller AC CONTROLS Controller Ethernet PLC with Color Computer Interface Heat/Cool Zones Up to 16 Standard (additional upon request) SIZE & UTILITIES Installed Cooling Capacity (gearbox and barrel) Consult ENTEK Engineering for Specific Applications Typical Cooling Consult ENTEK Engineering for Specific Applications Est. Power Requirements* Consult ENTEK Engineering for Specific Applications Centerline Height 1345 mm [53 in] Length, 48D 11785 mm [464 in] Width 2185 mm [86 in] Height (top of motor) 2030 mm [80 in] Weight (approx.) 31000 kg [70000 lb] * - Standard Machine Configuration: 1 Feed Barrel, 9 Solid Barrels (6 Aluminum, 3 Bronze/Cast Iron), 1 Vent Barrel, Gear Box Lube 40mm and Up, Barrel Cooling Pump, Main Motor Blowers 400hp and Up