Stencil printer T1000S

13    ax printing accuracy0.4mm ICtin ball is more than 0.5mm of BGA.

12    repeated accuracyless than 0.03mm,little error.

11    he thickness of PCB0.2-4mm

10    adjusting range X direction+/-10mm,    Y direction : +/-10mm   

9        scraperrubber

8        Scraper size200mm,300mmoption.

7        Max steel size400*500mm,the width of template can be adjusted, four point position to make PCB level.

6        Max printing area380*300mm

5 Position PCB pad and bore coordinate on the template by adjusting X, Y, Z and angle. Adjust distance between PCB and template by lifting platform.

4        Lift of template can be finished by handle.

3        The screen printing machine is suitable for different boards.

2  Position PCB with copper thimble and omnipotent thimble to make PCB ametabolic. It is convenient to print boards especially double side PCB.

1        T1000S is manual high precision screen printing machine, without electric components  and air components(air handspike)

T1000S technology parameters

3Raise the template, take out PCB board, finish printing pad on it. the scraper moving of automatic printing is drive by parallel guideway with screw drive, using screw rotate to finish scraper moving; rubber scraper is used in manual printer. Speed, angle and pressure are controlled by operators. with the rapid development of the electronics industry, the integration of emerging chip increase, the accuracy of the printer made great challenges, especially for small manual printer, some problems are below: 1.the worktable cant meet high precision printing;2.manual speed, angle and pressure are not controlled very well; 3. It is difficult to position between template and PCB and fix double side board. Manual printer T1000S  resolve above problems. Now, T1000S has applied patent in China. T1000S is similar function with automatic printers with low cost. It reduce cost and improve efficiency.  

2put solder paste into inside the template scraper is moved by drive device, solder paste is printed on the PCB through the bore on the template

1put and fix PCB(Printed circuit board) at the bottom of moulding board;

screen printing machine is common equipment in SMT industry, printing process include

T1000Ssummary                                    

T1000S has applied patent in China. It is similar function with automatic printers with low cost and reduce cost.