PS-K Printing Slotting Die Cutting Machine

 1. Installed with safeguard mechanism the paper-receiving arm can be operated by hand or auto matically in order to prevent the sudden falling down of the paper-receiving arm for the safety of the operating personnel.
2. The rising and descending of the machine tool platform are driven by the powerful chain.
3. The height of piling is 1600mm.
4. With the paperboard's piling to the higher level the machine tool platform automatically adiusts the tilting height.Lifting and descending the electrical machinery. Equipped with the brake function,so the machine tool can keep the fixed position to prevent falling down.
5. The organization of lift the paper by pneumatic motion.The paper receiving tray will automatically open and catch the paperboard while the paperboards are piled to the planned height.
6. The surface corrugated belt can prevent the sliding of the paperboard.

FUNCTION OF STACK DEPARTMENT

 1.Die-cut phase and the gap between the cutter mould rollers are both controlled by computer,which can display but aslo can to set up.
2. The cushion roller adopts mechanical camdrum portable structure (4Omm).
3. The gap between the cushion roller and the cutter mould roller adopts electrical adjustment.When stopping feeding paper,the soft will rise automatically;When working,the soft roller will return to the working position.
4. Adopt compentating system,No matter how much the cushion diameter changes.The speed of the cushion compentate and follow automatically ,without adjustment by man.
5. With restoration for cushion after wear and tear,Keeping the surface of the cushion smooth.

FUNCTION OF DIE CUT DEPARTMENT

 1.It adopt single shaft double knife slotting.the pressing wheel as the same as the the slotting cutter head, the pressing effection even better.It's good for the producing processing after gluing box follow-on equipment.
2. It pre-pressing system.the paperboard can't easy to crush after pre-pressing.
3. Upper pressing wheel wrap rubber spring outside,don't damage the paperboard.
4. The gap of the pressing wheel feeding wheel and the slotting knife adopt squagging instruction.
5. Transfer of notch knife seat adopt ball bearing silk bar and long life and high nicety.
6. The pressing wheel, slotting knife seat sway adjustment at the same step. the electric adjusting.
7. Notch knife width 7.0 MM,it adopt alloy steel material. After heat treatment and grinding,blade tartness and long using life.

FUNCTION OF GROOVING DEPARTMENT

 1.all roller adopt super steel.Adjust by transfer balance and made by plating chrome and skiving.
2. Printing phasic adopt PLCtouch screen control and electric data 360 adjusl(when dynamic and static state should adjust.)
3. Roller transverse adopt electric control and transverse adjust distance is 20MM.It can should auto refer middle.
4. It has oil base ink monitor and control stop provide paper after alarm without oil base ink.
5. Load and unload space of printing, foot step switch control positive and negative turning.
6. The gap of the adjustment of the transfer roll impressing roll rubber roll and the anilox roll adopt squagging instruction
7. The feeding wheel adopt swift movement instruction.made the adjustment even swift and convenice.

FUNCTION OF PRINTING DEPARTMENT

1   The feeding unit adopt SUN Extend-O-Feed Complete OEM Feeder System From USA.
2Three shaft lead edge feeding.smooth and accurate.
3Assistant suction(7.5KW),wind energy and press be controlled by transducer thereby adapt differ paper inquiry.
4front baffle clearance adjusting adopt protruding wheel configuration also convenience and apply.
5Provide paper glue roller adopt elasticity and fleac outfit.Not only ensure provide Veracity but also avoid press bad cardboard.Adjust capacity be controlled by electric machinery and showing nicety and trustiness by touch screen.
6.The high and Iow of the backstop and movement of the movement all controlled by the compressed airmotor,convenient and swift.
7Eleclric control machine separation and reunion together with alarm bell.It will persist belling when traveling.Then insure safety of operator.

FUNCTION OF FEEDING DEPARTMENT

uy at any place.

11. It sets urgent stop stayguy switch in each cell and ensure safety of inner operator ,the gap adjustment adpot two-way squagging instruction.
12. All of the gap adjustment. it can adopt squagging insturction. Made the adjustment even swift convenience accurate and reliable.

1.It adopt SUN Extend O-Feed Complete OEM Feeder System From USA.
2. All dust machine with high efficiency scaps can eliminate impurity on cardboard printing superficial ,then ensure clean degree of page space and improve printing quality.
3. All the transfer gear is slanting gear.It adopt high efficiency quench and part of cemenite transact.Though milling gear.pestle gear.sprikle lubricate thereby greatly improve transfer definition and natural life of using.
4. It should deposited order and change order convenience and shortcut.
5. Adopt PLC,touch screen multifunctional control,also system trustiness,low malfunction rate,operation briefness
6. Mainframe,wind machine,phasic frame be adopted transducer control, adjust speed placidity,save electricity,nicety trustiness.
7. This machine have function of auto return zero, auto proofread, wipe edition memory
8. Should produce more big carton together with gap provide paper function.
9. it have speed compensation system , automatic tail compensation cushion rolling speed. insure the same size of the carton and the cutting dies.
10. Cutting dies roll soft roll adopt international standard size , better commonality. It can be b 

Printing Slotting Die Cutting Machine
SUN Extend O-Feed Complete OEM Feeder System From USA printing slotting die cutting

  • Color & Page:Multicolor
  • Usage:Paper Printer
  • Plate:Flatbed Printer
  • Type:Flexographic Printer
  • Model Number:four-color
  • Brand Name:PENGSHENG
  • Place of Origin:Hebei China (Mainland)
  • Country:China (Mainland)
  • telephone:86-317-7636862
Delivery Time: 45days
Package: wood box
Supply Ability: 1 Set/Sets per Month
Minimum Order Quantity: 1 Set/Sets
Payment Terms: L/C,T/T
Port: tian jin port
Color & Page: Multicolor
Usage: Paper Printer
Plate: Flatbed Printer
Type: Flexographic Printer
Model Number: four-color
Brand Name: PENGSHENG
Place of Origin: Hebei China (Mainland)
*Your name:
*Your Email:
*To:Dongguang Pengsheng Packaging Machinery Factory
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

QH high speed corrugated carton lead edge feeder flexo Printing Die Cutting Machine

QH high speed corrugated carton lead edge feeder flexo Printing Die Cutting Machine 序号 参数名称 name 单位 规格 1 机械内侧宽度 Machine insdie width mm 2600 2 设 计 速 度 Design speed 张/分 Pcs/min 150 3 经济运行速度 Economical speed 张/分 Pcs/min ...

Come From cangzhou quanheng carton machinery

FP-320G/450G Flexo Printing Machine With Three Rotary Die-cutting Units

Product Description Features: 1.ceramic anilox cylinder for ink transfer 2.unwinding adopts Mitsubishi tension controller 3.rewinding adopts Mitsubishi tension controller 4.printing unit with 360°plate register adjustment 5.three die-cutting stations,the first and second ...

Come From Wenzhou Kingsun Machinery Industrial Co.,Ltd.

High-speed Automatic Flexo Printing & Slotting & Die-cutting Machine

Printing Slotting & Die-cutting Machine We supply entire carton production line,and various single packing machine be provided ...

Come From Botou Sunrun Trade Co., Ltd.