solna425G offset printing machine

l        Printing inspection table

l        Damper washer

l        CCD plate punch

l        Standard plate punch

l        Computer control system(SRC/CCSI/ Monigraf digital system)

l        High pile/Low pile

Optional Equipment

l        Blow down fans

l        Evacuation packing

l        Cylinder register device

l        CE safety guards

l        Program controlled lubrication

l        Motorized feeder and delivery piles

l        PLC controller&inverter drive

l        Touch screen

l        Podwer spray

l        Swing gripper feeder system

 Standard Equipment

    

12.  Equipped with photocell detector for missing sheet or angle sheet, which can prevent paper jam. Safety interlocked function can make mechanical system interlock in short time, enhance safety performance and limited the mechanical noise.

11.  Impression on/off is driven by DC magnet, offering a more stable function.

10.  All of operating data such as speed, counter, and fault tracking can be shown in the touch-screen to save service time.

9.      Controlled by PLC and driven by frequency convertor, greatly saving electric power and minimal running cost.

8.      Bearer contact, hard packing design to keep the printing jobs with sharp dots.

7.      High precision reamed cylinder bushing with good concentric and no impact.

6.      Side register which sitting on stable high tension ruler can ensure high precision register.

5.      Cylinder impression can be adjusted in both O-side and M-side, which can ensure better parallelity and accurate pressure adjusting.

4.      The programming controlled oil pump with time-lapse and measurable oil supplying can keep the clean greasing and lubrication system.

3.      Easy to adjust the front lay upwards and down, forwards and back.

2.      With longer feeder table makes convenient register setting operation.

1.      Advanced well-design technique to ensure the good quality and satisfied performance of the press.

Features:

3450

Kg

Weight

4515 x2750 x1800

mm

LXWXH(L)

6500 x2700 x1800

mm

LXWXH(H)

20.9

KW

Power Requirement

9

mm

Gripper Margin

5-8

mm

Gripper Bite

1000(H)/500(L)

mm

Delivery Capacity

800

mm

Feeder Capacity

1.90

mm

Blanket Thickness (max.)

650 x585

mm

Blanket Size

0.42

mm

Plate Thickness (max.)

635x 474

mm

Printing Area (max.)

0.04

mm

Sheet Thickness (min.)

0.60

mm

Sheet Thickness (max.)

645 x533

mm

Plate Size

250 x 210

mm

Sheet Size (min.)

640x 483

mm

Sheet Size (max.)

3000-10000

IPH

Speed Range

 

Specification

SOLNA425G(FOUR COLOUR)

Advanced well-design technique;longer feeder table.Controlled by PLC and driven by frequency convertor;Side register, etc.

  • Country:China (Mainland)
  • telephone:86-532-84851020
Advanced well-design technique;longer feeder table.Controlled by PLC and driven by frequency convertor;Side register, etc.
*Your name:
*Your Email:
*To:Qingdao Sangna Printing Machinery Co., Ltd.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

HS/LT-006 Heat Transfer PET Film for Litho Offset Printing

HS/CP-006 PET transfer film is specially coated for litho offset printing. It is very smooth and flat with one side release coating. Bright colors by offset printing and white ink by screen printing,anti-static and thermostability. Film Properties Of HS/CP-006 Polyester ...

Come From JIANGYIN QIANTAI NEW MATERIAL TECHNOLOGY CO.,LTD.

SYRINGE BARREL PRINTING MACHINE

A syringe barrel printing machine is a specialized printing machine used to print on syringe barrels. Syringe barrels are the cylindrical plastic tubes used in syringes to contain and dispense fluids or medications. The printing machine is used to print information, such as the ...

Come From LINKPLUS PTE. LTD.

Eplus3D EP-M650 Metal 3D Metal Printing Machine

Using MPBF™ (Metal Powder Bed Fusion) technology, EP-M650 is using a large building envelope and 4/6/8 laser systems to ensure a high efficiency production. The precise positioning and innovative area splicing control technology offers uniformity and stability throughout the ...

Come From Eplus3D