Mimaki JV5-160S Printer (63-inch)

4 color, 6 color, (8 color will be available later)

Number of colors

HS ink

Inks

540,720,1080,1440dpi

Resolution

JV5-130S:1361mm (53.5inch)
JV5-160S:1610mm (63.3inch)

Print width

Main Specifications

The external dryer (option) can take-up media with diminished drying characteristics.
High-speed print modes can be used with the external infrared heater even if the drying of certain media is not good.

8.

A large Post-heater enables high speed printing.
A Large-sized Post-heater in addition to the Pre-heater and Print heater provides consistent, high quality prints on untreated vinyl media and provides adequate drying for the media take-up device.

7.

Automatic change of double ink cartridges which results in 1.76 liters of ink per color.
Automatic change of 2 cartridges per set and a maximum capacity of 1.76 liters ink per color allows the JV5 to provide long consistent prints without concern about running out of ink.

6.

HS ink
HS3 ink has very strong scratch-resistant and high ink density for outdoor usage. Special handling and licenses are unnecessary because the ink is not a regulated organic solvent.

ES3 ink
No ventilation system is necessary due to very low odor. Everyone can use this eco-designed ink without any concern about odors.

Two types of solvent inks for various user applications will be released.

5.

Automatic compensation of media-feeding offers stable and high quality prints.
With a newly designed media encoder, media is fed evenly without any influence by the media weight, which results in stable and high quality prints.

4.

Automatic detection of media thickness and self-adjustment of the head height.
Detection of media thickness is automatically adjusted to a specified head height gap, which provides the best print quality when a new media (with a different thickness) is used.

3.

Automatic nozzle-out detection prevents waste caused by defective prints.
Automatic nozzle-out detection function reduces the loss of media and wasted ink by choosing to either discontinue printing, or to reclean the print heads when nozzle-out is detected.

2.

High quality and high speed printing by the newly developed 4 staggered print heads.
The JV5 series, which has new print heads equipped with 1,440 nozzles (180 nozzles x 8 lines), features a print stroke of 4 inches by arranging 4 one inch print heads in an array of four staggered lines. Through adopting variable dot technology, an amazing print speed of 40?/hr (430sq.ft/hr) with a new high quality print mode of 540 x 1080dpi designed for short distance viewed graphics & photography.