This machine is very popular for label printing and small transfer & applique sealing. If your image area is less than 8 inches, and you need to specifically isolate an area of a garment or bag, the tall pedestal on the DK8 allows for precise location of just the area needed to be pressed. Pockets, collars, socks, sleeves and similar areas are easy to press without flattening parts of the garment that should not be pressed. This saves the user from pressing very large areas of bulky items unnecessarily, as would happen on a standard T-Shirt press. The included interchangeable tables allow for isolation of the pressing area down to a mere 3x3 inches.
The DK8T Twin label press is a 6x8 small platen heat press with a high productivity design. The head pivots back and forth between the two pedestals effortlessly. While one side is pressing, the user is able to set up work on the other pedestal and maximize efficiency.
The DK7 has a unique hold-down device that pulls the rear strap of the headwear down against the pressing surface, holding the cap in place. The DK7 accepts different sized interchangeable tables (standard size included - see additional accessories below) for accommodating youth & chld sized caps, fitted and low profile caps, and many other items.
The DK7 Cap press is a fully functional cap press for printing the front face of any sized headwear.
Heat Presses
The hot press vacuum press is used for the test parameters of the material properties, including the fluidity of composite materials, resin fluidity, and gel time. The composite material is formed after hot pressing and curing. The parameters of temperature and pressure in the ...
Vacuum hot press machine is used for the test parameters of the material properties, including the fluidity of composite materials, resin fluidity, and gel time. The composite material is formed after hot pressing and curing. The parameters of temperature and pressure in the ...
Hot press vacuum press is used for the test parameters of the material properties, including the fluidity of composite materials, resin fluidity, and gel time. The composite material is formed after hot pressing and curing. The parameters of temperature and pressure in the hot ...