Matrix Printing Machinery

The MATRiX provides a web page image of whatever you drag and drop onto its set up screen, including live video from your factory, plant or equipment. But it can also send email and SMS messages when you want it to. For example, when a critical situation is detected in your plant or equipment, power is lost, or regained. The possibilities are endless.

Abilities:

Because the MATRiX is based on PC technology, a wide range of low cost and well proven software is available. One of which is the ability to access the MATRiX remotely from any PC anywhere in world, via the internet, so the MATRiX can be configured or changed from any PC. You can do it from your office, your IT personnel from their office, we can even do it from far away. The MATRiX has connection sockets for any standard PC screen should a local connection be required, but normally the MATRiX is screwed to a wall, and sealed.

Operation:

A standard PC mother board with CPU, memory, and all required interfaces.  Plus standard off the shelf input / output boards (up to 16) with a wide range of specifications, (up to 92 channels per card) See list on following pages.  Standard power supply and hard disk, and standard Off the shelf cable termination units with screw terminal, DIN connectors, or BNC connector panels for very easy connection to the outside world and what you want to monitor or control.

Main requirement of the MATRiX is simplification and maintainability. So the MATRiX uses standard, locally available PC components, so repairs can be done by your own IT staff, or a local PC engineer.

Whats inside:

The MATRiX requires no programming. Connect whatever sensors (temperature, level, speed, humidity, etc), and control systems you wish to monitor or control remotely, connect a standard PC screen or connect with any PC on the same LAN, or anywhere in the internet, then drag n drop onto the screen what you want to see, where on the screen you want to see it, what I/O line to connect to, and how you want it to respond to input signals, or output controls. Then click run and disconnect your set up screen.  Whatever you have placed on the screen is now visible on your web site from any device that can access the internet.  The MATRiX then runs totally unaided. If power is lost, MATRiX backs up data, posts a warning on the internet, sends out an email or sms, and powers down. Then restarts automatically when power is restored.

Concept: A rugged, industrial quality stainless steel wall mountable unit with power (110 to 240v ac, or 12-24v DC) and internet connection (local LAN or dedicated DSL/ADSL line on telephone or coax delivery line, WiFi signal, or GSM or satellite data signal) on one side, and large number of input/output cable points on the other.  Operating totally unaided to provide internet access via standard browser (e.g. IE6), to a large number and wide variety of measurement sensors, data signals, and control systems, anywhere in the world where there is an internet connection.

Control as you have never seen before. Up to 768 digital in or out, or up to 4,096   16-bit A/D and 64 14-bit  D/A. channels.  A wide range of industrial measurement interfaces, and real-time video, all with zero programming.

MATRiX

MATRiX, applications:
By industry-
Chemical
Food production
Glass and Ceramics
Manufacturing
Mass remote seism