Bulk Feed Tanks

Strength & Durability
High tensile steel sidewall sheets, with a galvanized coating, provide outstanding strength and durability along with the 2 - 2/3" (68 mm) wide by 1/2" (13 mm) deep corrugation and precision formed panel. Cumberland also provides solid, convenient access via a fully die-formed side ladder with dimpled non-skid rungs.

Cumberland's patented "Auto-Lok" lid system allows the bin to be opened, closed and locked from the ground. The lid swings open a full 180 degrees, eliminating interference with fill augers.

Secure Access
Cumberland feed tanks feature the exclusive, patented "Auto-Lok" ground control access system for opening, closing, and latching the fill cap safely and easily from the ground.

Our cap system comes completely factory assembled, saving significant time and trouble in installation. The cap itself swings open a full 180 degrees. The cap lies flat, parallel to the ground, completely eliminating the annoying and all-too-frequent interference with, or damage to, the cap from the fill auger.

In fact, to meet consumer demand, the Cumberland Fill Cap is available as a replacement for destroyed or damaged caps on most competitor's tanks.

Cumberland offers you a variety of bin sizes to fit your specific needs.

Exclusive to Cumberland hoppers, the "eave", the upper edge where the hopper is joined to the sidewall, is die-formed to conform to the shape of the sidewall corrugation (See A.). Most other manufacturers depend on crimping and bolt pressure to force the connection (See B.) ... which produces corrosion-prone distortion and "dimpling" of the sidewall. Cumberland's die-formed eave provides a much tighter seal and smoother flow of material.

Factory Formed Fill Kits
Another Cumberland exclusive is the pre-punched, extruded lip roof panel provided for the optional pneumatic fill kit. Pre-punching eliminates the inconvenience and difficulty of field-cutting the openings for the fill and exhaust tubes, and insures secure, moisture-proof seals.

Bin Roof
Cumberland offers your choice of a 30 degree (shown above) or 40 degree bin roof to adapt to any application. Roof panels are precision manufactured using die-form tooling to provide consistent quality. Both 30 degree and 40 degree roofs feature reinforcing ribs at each roof seam for added strength and rigidity.

E-Z Kleenout Panel
Cumberland's optional E-Z Kleenout hopper panel allows for convenient and thorough ground level inspection and cleaning. The panel can be easily unbolted removed from the exterior of the bin in a matter of minutes. A weather seal gasket protects the bin contents from the elements The E-Z Kleenout panel can be easily adapted to existing feed bins and can be used on tanks with up to a 15 ton maximum capacity.

Legs & Anchors
Cumberland tanks are supported by our own unique, roll-formed, fully galvanized 6-bend legs (manufactured with Cumberland's exclusive computer controlled machinery), providing significantly greater strength than simple angle iron legs and greater corrosion resistance than painted legs. Galvanized roll-formed cross ties and two piece leg anchor sections provide strength, stability, support, and load transfer.

40 Degree Roofs
40 degree roofs provide additional strength and capacity. (Shown with optional pneumatic fill kit.)

Drip Lip
Cumberland's drip lip water deflection design is a one-of-a-kind, roll-formed bottom sheet edge. It forces water away from the hopper and lower boot area, giving complete weather protection without a loss in capacity.

Bulk Feed Tanks
|

Cumberland offers galvanized steel storage bulk feed tanks available in a variety of specifications featuring: