|
GYM-168
6. The fineness of the product can be transformed quickly if you want to produce the different products in different particle size; the stability of the product is good.
5. The grinding motor is controlled by a soft starter. By this can save powder and give a better protection.
4. The main body and its electrical machinery are installed separately to make sure the grinding machine can work more stable.
3. It has high-effective cyclone system and dust remover. The dust remover has excellent dust removing effect, it wont be blocked. The product comes out from the cyclone system and
the dust remover can do both separately packing or gather together then do packing.
2. By increasing grinding path, the powder made by it have high purity, excellent tangent point (pass percentage is 100%).
160
1000
3000
140
1200
2500
130
1500
2000
110
1800
1500
80
2200
1250
50
3000
800
45
3800
600
power consumptionKW.h/Mt
OutputKG/hour
GYM-168
mesh number (D97)
1. This equipment is in large scale, its output is big, but energy consumption is very low, complete machine installed capacity 220KW.
Characteristics:
6. The power distribution cabinet installment is automatic control. It can avoid human factor to make mistakes, guaranteeing the quality of product is stable, lengthening the
service life of equipment, reducing the operators and the production cost.
5. The complete equipment is the subordination negative pressure type production, the vibration is small, the noise is low, the running is stable, it doesnt have the problem of dust
divulging, it is environmental protection equipment.
4.Working principleWhen operating, the raw material is fed continuously from the input system into pulverizing chamber, the material will be fully pulverized after impacting,
pulverizing, grinding and concussion by the grinding wheel; then the pulverized material is conveyed to the classifying chamber to be classified according to their particle size.
The qualified particle will go into cyclone separator through grading wheel, and then go out to be product. A little unseparated powder will be collected by high-effective dust
collector then putout to be qualified product. During this period, the whole system is working under negative pressure, the air which is cleaned by dust remover will go out through
high-pressure air-introduced machine, and no dust will out to the air.
3. It is has an inner hierarchy system. The product can be adjusted freely between 600 mesh and 4000 mesh. Take the calcium carbonate of D97=1250 mesh ( particle size less
than 2.12um) for example,the powder made by this machine have high purity, the point cut-off is thin and have high quality.
2. Production capacity: for powder particle size D97=1250 mesh, its output is more than 2 MTS powder per hour, is keep on working in one year, its yearly output can be more than
20,000 MTS.
1. This Equipment installed capacity is 245KW and the power consumption is about 90 KW.H per hour. The power consumption is lowest if compared with the similar equipment.
GYM-168
|
