Lathe Machine

Max Cut Light Duty >> Lathe Machine >> Capacity SPECIFICATIONS: CAPACITY Height of Centre 165 mm. Swing Over Bed 330 mm. Swing Over Slide 180 mm. Movement of Cross Slide 225 mm. BED Bed Type 2 V & 2 Flat Bed Width 238 mm. Length of Gap in Bed 110 mm. MAIN SPINDLE Size of Threaded Spindle Nose 8 TPI 60 mm. Taper Bore in Spindle Sleeve MT 3 Spindle Bore 40 mm. TAIL STOCK Ram Diameter 38.1 mm. Taper Bore in Spindle Sleeve MT 3 Ram Travel 115 mm. COMPOUND SLIDE Travel of Compound Slide 120 mm. Tool Shank Section 22 x 22 mm. SPEEDS No. of Speeds / Range 8 / 35 825 RPM THREAD / NO. RANGE Lead Screw Diameter & Pitch 25.4 mm. X 4 TPI Metric 19 / 0.50 to 8.0 mm. Inch 23 / 4 to 40 TPI ELECTRICAL Power Required 1 H.P. ADMIT BETWEEN CENTRESSIZE A.B.C. 4-6 650 mm. 5-3 875 mm. 6 1100 mm. SPECIAL FEATURES BED: Made of Close Grain Alloyed, Cast Iron up to required Hardness and Seasoned after rough machining to avoid Stresses. CARRIAGE : Mounted on invert V and flat guideway of the bed. Carriage is wide enough to have a maximum bearing surface with rigid tool support. The slides are accurately scrapped. HEAD STOCK: Four Step Head Stock precision Bearings Mounted on Hardened and ground Spindle. Hob Cut Back Gears for low Speed. APRON : Oil bath type designed with independent drive motion for feeds and screw cutting with interlocking arrangements. Worm and worm gear is used to engage auto feed for surfacing and sliding