Vertical Baler Model 6030 HD

Let Ace Equipment Company help you with your solid waste problems

If the lock is overridden, the baler will shut off.  The platen will not continue to raise to the home position.

When the feed gate is closed it automatically self locks in position.  This allows the operator not to open the feed gate during operation.  The platen will open the feed gate, then shut off.

The feed gate will open automatically after the cycle is complete, therefore you do not have to place the material down to open up the feed gate.

Automatic feed gate open

Feed Gate on Vertical Baler

The platen is guided by a four point guidance system, which eliminated side shifting of the platen.

Therefore the entire baler does not need an expensive rebuild due to metal on metal contact.

No metal on metal contact, the Nylatron is plastic which is replaceable.

Platen Guidance System on Vertical Baler

No pressure switch for shifting of platen.

This allows the platen to dwell against the cardboard to take extra memory out of the baled material and produce a more dense, consistent bale.

The platen will go down for a preset time, then will shift and come up.

The platen shifts from down to up based on a timed sequence.

The vertical baler is controlled by a computer, with a LED read out.  If the lower door or feed gate is open the baler will not operate and show what is wrong on the LED read out.

Electrical on Vertical Baler

The slow shift of the valve allows the extension of life on the cylinder, hoses and pump.

There is no sudden build up of pressure and quick release.

The design of the hydraulic system allows the vertical baler to shift softly.

Hydraulics Vertical Baler

The light will come on and the baler will work in the automatic mode of operation.

The safety light will come on if all the safety features are in place, the feed gate is completely closed and the bale door is completely closed.

Safety Light Vertical Baler

The proximity switch cannot be overridden similar to a conventional limit switch.

The proximity sensors are on the feed gate and the bale door, both must be closed for automatic operation.

Proximity Sensors on Vertical Baler

Download the in PDF.

Vertical Baler Model 6030 HD
Features and Benefits

try vertical baler    to get through more products