Umema Blister Pack Machine

Installation by Umema Pack Technologies including free of charge operator for the duration RUN

Consumption                                     :               0,2m3/h

Supply temperature                       :               Approx. 15-18 C

Cooling water

Consumption                                     :               up to 10 Nm3/h

Supply pressure approx                                :               6-8 bar

Compressed air

Umema Blister Pack Machine Model UPT-210 for ALU/ALU

400/230 Volt+/- 10%, 40/50 cycle, 3 phase with neutral conductor and separate earth wiring control voltage 24 volts.

Connected Load

Max forming depth                         :               12 mm

Max blister rows                              :               As per drawing

Max, punching width                     :               190 mm

Max. punching width of web      :               100/210 mm

Min/max. Index                                               :               40/130 mm

Format range

Format layout and quality of material

Forming depth depending on feeding system

Min/max, 25/45 cycle/min

Number of Cycles

Technical data

Machine operating in HMI (Human Machine Interface) with all programming of operating side

Operating with PLC

Tablet feeding with manual tray

Main drive with servo controlled

Made of acrylic glass

Safety doors at operator side

Waste rewind motorized

Cutting station chute for blister our feed

Mechanical index before the punching station, servo controlled

Umema Blister Pack Machine Model UPT-210 for ALU/ALU

Forming heater plate upper and lower for Alu/Pvc blister , Fill section length approx 700mm, accessible from both sides, Unwind of lid material on operator side with mechanically operated shaft spreader for core diameter 45mm

Max. Reel diameter 210mm

Continuous cooling station

Quick coupling for cooling water supply

Web clamping during machine stop

Forming Station:

Forming film reel support with one mechanically operated shaft spreader  shaft spreader max.reel diameter 400mm

Indexing in servo drive

Basic Machine in Modular design with one change with one change part Alu/Alu Or Alu/Pvc

For ALU/ALU & ALU/PVC forming

Umema Blister Pack Machine Model UPT-210

Umema Blister Pack Machine Model "UPT-210" Speed "200 Blister / Minit"