PA-300R AUTOMATIC PASTING MACHINE

The factory manufacturing this machine shall be equipped with (1)power source, (2) air pressure (3)water (4)sulfuric acid.

Conveyor specification : American made #613T 1/4" x W13" x L101".

This machine is equipped with automatic indication panels per minute for adjusting panel pasting speedand indicator lamp for warning gird of refilling materials.

This machine is equipped with two sets of dripping-sulfuric contact roller and the complete sulfuric piping circulation device, such that the manufacturer needn't ass peripheral to the machine.

The hopper is lifted with front cylinder, which can rapidly replace conveying belt and install hopper and pasting accessories.

Non-dripping roller unit flatting device is designed because lead plaster on the plate shall be diluted after the panel is struck off by dripping contact roller unit.

After striking by extra-hrad-steel contact roller, the pasting directly feeds panel to dripping-sulfuric contact roller unit for flatting and adding sulfuric. The machine is equipped with two sets of  dripping-sulfuric contact roller units, which canincrease the acid content of panel. And at the same time, dripping-sulfuric contact roller is equipped with safety device for avoiding the sulfuric spurring out, and protection of operator's safety as well as prolonging machine's service life.

This hopper exit is fitted with one extra-hard-steel contact roller and its panel pasting thickness can reach 0.1m/m precision.

The inlet of hopper is fixed by feeding rubber roller and hopper, among which feeding rubber roller can easily control its up and down, and the hopper is fitted to two finishing rollers, which can completely cover the grid. And its front roller is covered with stainless steel plate foravoiding that the grid is blocked by backflow pasting , such that the grid can smoothly enter into.

The conveying speed of panel and pasting conveyer of hopper can be set and adjusted through frequency transformer.

The grid feeding design applies extract inching theory, and can be adjusted according to grid width.

This machine uses unoil vacuum pump to match vacuum control valve so as to feed grids exactly and automatically. The spindle uses super-bard rack to match the line bearing so as to reach high-speed standard.

This machine can automatically paste more than 100~ 180 double panels per minutepasting speed can be adjusted according to different panel width .

This machine can automatically paste its plate with thickness 1.0T~4.0T, length 285m/m and width 170m/m, as well as length of hangers on the two sides is within 330m/m.

This machine is available for automobile, motorcycle, NP storage battery low-antimony or calcium Plate pasting.

1. This machine uses high-speed and automation design, whose panel is quite stable, and easy to operate.

  Brief Description :  

The specification will be changed without notice owing to our continuous research and design.

Weight : Net weight 2000kgs. : Gross weight 2300kgs.

Loading size of machine : 3700m/m(L) x 1500m/m(W) x 1900m/m(H)

Machine size : 3260m/m(L) x 1415m/m(W) x 1670m/m(H)

Tree-phase power supply, voltage and frequency in accordance with customer's requirements.