|
Use of fixed pellet allows "high precision", "even grinding on
|
|
both sides", "processing", "little warping". Increased stock
|
|
removal rate reduces the process time.
|
|
02. No abrasive, so there is no worry about damaging the
|
|
work enviroment.
|
|
03. Workpiece with holes or dents can be processed
|
|
without a hitch.
|
|
04. More economical than abrasive machines since there is
|
|
less wear on the carrier, internal gear and sun gear.
|
|
05. Workpieces are easily cleaned, speeding up movement to
|
|
the next process.
|
|
06. Water soluble grinding fluid is used, so sludge can be
|
|
processed with a centrifuge, improving the work
|
|
environment in comparision to free abrasive lapping
|
|
07. Automatic pressure conversion sytem(first stage, second
|
|
stage, third stage)used. All you have to do is set the time
|
|
and pressure for each stage for simple rough, intermediate
|
|
and finishing processing.
|
|
08. Automatic numerical thickness controller can process within
|
|
tolerance of 0.005mm even when the thickness of workpieces
|
|
are different.
|
|
09. The upper plate is raised and lowered automatically with
|
|
an air cylinder, so there is no need to worry about breakage
|
|
even with thin workpiece. Mis-chucking can be verified
|
|
from the digital reabout, making it easy for anyone to the unit.
|
|
10. Safety devices prevent the upper plate from falling, keeping
|
|
safet first at all time.
|
|
11. The load cell has been installed to watch the present pressure
|
|
for high efficient process.
|
