Pipe Gas Cutting Machine

Vertical movement of torch  is 70mm.

Horizontal movement of the torch is 125mm.

Min OD 100mm to 600mm OD.

Machine mounts on Pipe OD and on rotating handle indexes around the pipe simultaneously cutting the pipe.

Fixed length chains supplied readily with machine for standard pipe diameters.

You can also do bevelling by adjusting torch angle, bevel degree from 35degree to max 45 degree a engraved degree dial is provided for the same on the machine.

Select proper  clamping chain as per diameter now slide the machine along with chain on to the pipe, now tighten the nut on top to tighten the chain. Adjust cutting torch to requirement , start gas supply to ignite torch adjust flame length with the height adjustment knob.You are now ready to start cutting of the pipe . So now start rotating the handle given on to the side which starts indexing the machine on the pipe diameter. As the machine rotates along the diameter the torch now cuts the pipe .

The pipe gas cutting machine is designed to tackle harsh site conditions ,so is made of all steel construction.