BARS-1A sawmil
BARS-1A machines are designated for cutting round logs into high quality edged lumber.
SCOPE OF APPLICATION
The machine is to be used at woodworking factories to manufacture high-quality lumber, glued beam, edge-glued panel, and window, parquet, molding and furniture workpieces.
UNIQUE FEATURES
Maximum diameter of the log cut is up to 1 m
Models for sawlogs ? 700mm, 950mm, 1000 mm
Options: PC with OPTIMA+MONITORING software
BRIEF DESCRIPTION
The machine consists of the following principal components:
a fixed machine compartment containing two mutually perpendicular circular saw blades, capable of longitudinal motion both horizontally and vertically
a rail track beneath the machine compartment
a mobile saw log carriage mounted on the track and moved by an electric drive with continuous speed control
control system with an electrical cabinet and control panel
Productivity of the machine is 1.52 m3 per hour (depending on the size of the workpiece and the diameter of the log).
The rail track in the basic configuration is 18 m long, and the machine can fit within 3-m high premises 20 m x 6 m (120 m2).
PRINCIPAL BENEFITS
Obtaining high-quality lumber over one cut
The machine can replace several machines so the required floor area is significantly reduced as well as the number of workers, and power expenditures
An increased sawn lumber yield of 63%69% on the average due to the variability of the process of cutting and the minimization of wood waste
Maximum yield of quarter-sawn lumber
High-quality lumber surface thanks to hard-alloy saw blades
High-precision cutting of
Three modifications of BARS-1A are produced: BARS-1A-70, BARS-1A-95 and BARS-1A to cut logs from 700mm to 1000mm in diameter.