bandsaw machine

Saw Head Frame
			The rigid 'C' section frame carries the mountings for the two band wheels, heavy duty worm drive gear reducer, the band drive motor and saw guide arm mounting supports.

			Band Wheels & Drive System
			The band wheels are cast iron for long, productive life. The deflection free 1.38 inch (35 mm.) wheel spindles ensure the wheels run true regardless of tension stress or cutting loads. The spindle assemblies incorporate tapered roller bearings for greater rigidity and long service life. The wheel tracks the blade so that the back of the band is contacts the wheel flanges to support the band. The drive motor is coupled to the transmission through a variable speed pulley.

			Drive Wheel Transmission
			The drive wheel transmission is designed and built by Amada to provide high efficiency speed reduction, which requires no external cooling, to deliver more power to the large diameter drive shaft. This shaft ensures that this developed torque is transferred to the blade with no strobing, enabling the machine to efficiently cut high alloys as well as free machining materials.

			Pressure/Flow Feed Control
			The independent pressure and flow controls in series ensure the optimum cutting rate can be obtained regardless of section or alloy being cut. The pressure control determines the cutting force applied to the blade and the flow control sets the maximum fall rate of the head. For example for difficult to machine materials the pressure is set higher than free machining alloys and the flow is set lower, as shown on the escutcheons above the above the control knobs.

			Idler Wheel Motion Detector
			The wheel motion detector will turn off the blade drive in the case where a blade breaks or is jammed in the work piece. This feature also prevents premature wear on the drive wheel from a stalled band.

			Automatic, Powered Chip Conveyor
			The electrically powered chip conveyor auger automatically removes the saw chips from the saw while draining the cutting fluid back into the fluid reservoir. The automatic chip conveyor greatly reduces cleanup time and enables the machine to run longer without operator cleanup.

			Multiple Index
			The machine control has the capability to make up to 9 index passes giving a maximum cut length of 141.7 in. (3,600 mm.) in automatic.

			Split Front Vise
			The work holding vise is split so that it clamps the work piece on both sides of the cutting plane. This additional support in front of the cutting plane minimizes the burr on the cut pieces.

The electrically powered chip conveyor auger automatically removes the saw chips from the saw

Country:India
telephone:91-91-22-2202-0625

The electrically powered chip conveyor auger automatically removes the saw chips from the saw

*Your name:	Enter name here eg:Ralph zhang
*Your Email:	Enter email here
*To:	Tru-Cut Tools (I) PVT. LTD.
*Subject:
*Message:
	Enter between 20 to 3,000 characters. English only. Characters Remaining: 0 / 3000
*Enter the secure code shown below	Reload Image

		We do inquire for you , please wait ...

Strapping machine manufacturer

Joy Packstands out as a premierstrapping machine manufacturer. Renowned for our commitment to quality and innovation, we specialize in providing state-of-the-art strapping machines that cater to a wide range of industrial needs. Our strapping machines are designed to enhance ...

Come From Joy Pack

Carton wrapping machine Manufacturer

Joy Packis dedicated to providing high-quality solutions for efficient and secure carton packaging. Our state-of-the-art Carton wrapping machine Manufacturer are designed to meet the diverse needs of modern packaging operations. With precision engineering and advanced ...

Come From Joy Pack