HS-342CN Sewing Machines

 
HS-342CN
  • TANDEM 4-CAM SYSTEM OR 2+2-CAM SYSTEM
    The two carriage may knit together,as an ordinary 4 system on the total machine width(90"), or they can be separated to produce two separate pieces simultaneously.
    Therefore tandem operation capability allows the machine to perform two individual roles,significantly increasing the versatility and flexibility of the machine.
    Special cams construction introduced to each knitting section enables to provide 3-way technique and transfer action,which incorporates the highest technology both in its design as its build.
    The range of machine is prepared to offer the most complete technical performances in the market and signifies maximum produce.
    HS-342CN is prepared to offer the most complete technical performance at a competitive price which means a production and price.
    The compact carriage brings high speed stability and it drastically produces a time loss at the counter turn cams.
    The latest model solenoids and actuators which give sufficient strength where it is needed have durability,provide high speed an stability,making three machine three of the most innovative products in the industry with their combined functionality,productivity and efficiency.
    Stitch density control by stepping motor drive in each knitting section can offer simple and quick stitch presetting and its correction.


     
  • SINKER SYSTEM(OPTION)
    The sinker system is mounted enhancing the general purpose properties so that the system can correspond to diversified fashion needs.
    Thus,the system can exercise its power in a variety of use purposes including the shaping jacquard and the increasing,decreasing.
    Sophisticated stitch appearance through the stitch formation and holding down function.
    Significant improvement in quality and texture for complicated structure pattern are achieved.


  • NEEDLE PLATE
    The needle plates are made of special hardened steels so that the system reduces wear and the possibility of damage enabling high speed knitting.
    The needle plates are easily replaceable if there are any accidental damages.
    The needle plates became effective in decreasing of running noise.


  • STITCH PRESSER(OPTION)
    Presser unit,simple and easy to operate is separately mounted on the front and rear carriage boxes.
    Introduction of the stitch presser unit to the carriage allows expand pattern possibilities and virtually to obtain special effects,such as multi-tuck stitches,wave stitches etc.
    They are controlled,range by range,by the program and specially suitable for knitting of fully fashioned and embossing fabrics.
    The latest foot pressers are moter-driven system that allows the pressers to carry out individual operating adjustments in both knit and transfer,in either direction.

  • DOUBLE TAKE-DOWN SYSTEM
    The main roller system is composed of segmented sectors having loaded spring to ensure a uniform take-down over the whole fabric width,and is driven by a torque motor which is proportional to the effective take-down needs.
    The sub roller system attached directly in the looping area is a take-down device with independent drive.
    Exert in a remarkable power for shape knitting in which transformation of knitting width is inevitable widening or narrowing.
    It has many other merits as shape knitting with small stitches or fabric knitting without edge distortion and so forth.
    The opening and closing is possible through program commands.

  • YARN CARRIER
    The yarn carrier traversing range can freely settled every carriage stroke by introduction of a yarn block mechanism.
    Yarn carriers are controlled by computer for automatic positioning 16yarn carriers are on 4 double profile rails.
    Yarn carrirs box made of plastic resin became effective in decreasing of running noise and can easily be altered.


  • CONTROLLER SYSTEM
    The machine computer has been specially designed so that it can be used soon by operators.
    It is possible to read on the screen everything that has been programmed in one stroke.
    The computer control unit has microprocessor and ram memory for controlling the machine functioning and for permitting operator usage of keybord and input or modification is normally working.
    The programming has been studied in order to be easy and fast making automatic complex operations such as pre-selection and selection of receiving needles,which would require high attention and mistake chances for the operator.
    The possibility of keeping in memory a high number of machine course cycles and of loading from floppy disk.
    The computer is possible to read on the screen everything that has been programmed in one stroke,stitch selections,thread guides and work codes.
    The relevant,highly sophisticated software allows even complex stitching designs to be exacted in relatively short times.


  • RACKING
    The racking system on the back needle bed is obtained by a precise ball screw and s powerful motor controlled by highly sophisticated electronic driver.
    The exact position of the racking can be adjusted through the user program,and it is possible to perform some transfer while knitting on both needke-beds,and also to optimize the racking position to improve transfer action.

HS-342CN Sewing Machines HS CODE 8453

  • Country:South Korea
  • telephone:82-02-2296-8637
HS-342CN Sewing Machines HS CODE 8453
*Your name:
*Your Email:
*To:Hyesung Machinery Co.,Ltd
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Sewing Machine Frame Mould

Sewing Machine Frame Mould Large plastic frame plastic injection sewing molds, suited for oversize embroidery projects. Mould Name: Embroidery Machine Frame Mould Part Material: Pa 66 GF50% Product Description Large Embroidery hoop inner frame Mould Cavity: 1 Cavity Mould Size: ...

Come From HANKING MOULD ENGINEERING LTD.

Carv large torque MD double-drive smart digital puller,accessory for sewing machine with the professional-grade autonomous control system

Parameter 1.model:MDW/MDP/MDD front flip 2.Drive method:independent stepper motor(large torque) 3.Lifting method:motor lifting method 4.Pressure adjustment:spring adjustment 5.Lifting height:small and equal 15mm 6.Support maximum speed:7000rmp/min 7.Voltage/power:110-240/200w ...

Come From Ningbo Carv Automation Technology Co.,Ltd

CARV 5000rmp/min AT electromagnet template digital puller,accessory for sewing machine with independent motor

Parameter 1.Model:ATW/ATT/ATP/ATI/ATM 2.Drive method:independent stepper motor 3.Lifting method:electromagnetic lifting method 4.Pressure adjustment:spring adjustment 5.Lifting height:small and equal 20mm 6.Support maximum speed:5000rmp/min 7.Voltage/power:110-240/180w ...

Come From Ningbo Carv Automation Technology Co.,Ltd