HAODA 2009FD (alcohol-water) composite ink

Properties:

1No benzene and MEK ink, diluted with alcohol, security,good environmental protection.

2high concentrations, can reduce the cost of printing.

3With a shallow version of the transfer of outstanding results, with good dry performance, from low to high speed to meet the requirements of the printing process.

4 With good dry and stable effect of composite strength. Can also be used for solvent-free compound and the composite extrusion process.

Using notice

1. Printing substrate materials: BOPP

The printing substrate surface by the corona treatment, and to 38 dyne. Other printing in advance with technology.

2. 2009FDs white ink with chlorinated polypropylene (such as type 200SA Li-fu)base of complex ink with colors ink ues of printing.

3. Diluted solvent

NOTES: Methanol hazardous to eyes, please be used with caution.

4.Recommend viscosity printing

White ink:13-15 seconds (3 # Cup / 25 )

According to our test data shows that the amount of solvent used up to the experience of 100-180 (volume ratio), users need to refer to the actual orders for the adjustment process to confirm requirements. When the printed version of version of deeply over 35um using lower viscosity when printing, the printing may occur Fuzzy and bubble phenomenon, the need to increase the use of viscosity of ink. According to my company"s test data showed that the amount of solvent used can experience 60-100 (volume ratio), users need to refer to the actual orders for the adjustment process to confirm requirements.

5. Drying Performance Description:

2009FD (Alcohol-based water) ink ,it is composition of alcohol and ester,compared to chlorinated polypropylene-based inks of the benzene, the slow evaporation rate of about 10, in the use of it, the need to improve dry, or 90 of the conventional operation of the printing machine degrees.

6.ink adhesion fastness Description:
Just under the print machines, ink fastness of the film is still attached to further enhance, and print to place, the attachment to achieve the best state of fastness, printing operation, increase channel temperature, Increase air flow and promote dry thoroughly in print, ink better adhesion can be improved fastness.

7. A new type of 2009FD (alcohol water based) is environmentally inks, It is different Histocompatibility with the traditional chlorinated polypropylene ink. Good adhesion fastness is important to thoroughly clean all of the printing plate.

8. 2009FD ink dry composite Tip:
2009FD ink suitable for dry-type composite processing technology, can also be used for extrusion or solvent-free composite technology; 2009FD ink with Bicomponent PU2975 and the AD9940 water-based adhesive from the company ofHuaguang resin has the best compatibility ,when anyother Alcohol and water-based adhesive, in the low state of adhesive (the number of cable line roller 180 # or more), Please pre-confirmation strength of the apparent and effect of compound.

9. The use of cost analysis: (such as white ink by 20 kg)