Surface Printing Poly Inks

Surface Printing Poly InksMulti Gloss Flexographic/Rotogravure Solvent Based Poly Printing Inks for treated Polyethylene, Polyproplyene PVC and wide range of Olefinic substrates. CHEMIFLEX inks are designed for surface printing on Flexographic machine with anilox rollers.Features: - Excellent Printability High Gloss High Strength Good Tape release Good Scuff resistance Good Crinkle resistance After addition of Hardners @ 5% at the time of printing, good alkali resistance and soap resistance is obtained. Hence our A.R inks after addition of Hardners are suitable for detergent pack printing, spices and oil packing.Substrates: - Can be printed on all types of Polyethylene, Polyproplyene, PVC, PT, MST.For Polythylene and Polyproplyene film the treatment should be 38n dynes per / cm for good adhesion and optimum resistance properties.Printability: - Excellent printability in Half Tone and good coverage in Full Tone.Free from any printing defects such as streaking and scumming etc.Excellent rub and scratch resistance.Diluents: - The inks have a tolerance with a wide range of solvents to accommodate variation in press speed and conditions.For Flexo: - The usual diluent for Flexo inks is a blend of Isopropyl Alcohol and Butyl Alcohol. Ink makers recommendation should be followed in order to get the best printing and optimum drying under various conditions.For Gravure: - Recommended diluents is Toluene or blend of Isopropyl Alcohol, Butyl Alcohol is recommended as Retarder.Colour Range: - Full range of Pantone basic shades including Metallic and ARSR and Light Fast Shades.