Ultrasonic Ink tank

staffs permit .

3. Please do not open the bottom of the tank without professional

tank when ink level lower thanMin. is prohibited .

the ink level shouldbetween Minand Max. Running the

2. The end of the tube should be lower or equal to theMin. .

1. No liquid flow into the bottom of the tank .

Caution :

5. When the printer does not work , please switch it off .

4. Plug on the power cable and switch on . It will running automatically .

3. Unscrew the Ink tube port and put the ink tube from the printer into the tank and screw up the Ink tube port tightly . The end of the tube should be lower than Min. level.

2. Pour the ink into the tank and screw up the cover tightly . Please keep the ink level between Min. and Max .

part of the tank .

1. C1ean the inner part of the tank with solvent . Avoild liquid flow into the bottom

Start to use :

Schematic Draw:

Ink temp.26-38

Circulated operating time : working 5--8 Min  ;  Stop 60120 Min

Volume : 3.5L

Power : AC220V 50HZ 1A

Technical Parameter :

Ultrasonic/Thermostat Ink Tank

9. When the printer does not work,please switch it off ..

8. Please keep the ink level for each tank within Min. and Max. .

7. The thermometers on the panel demonstrate the temperature of the ink in each tank.

6. Turn on the switch on the back of the machine .

5. Unscrew the lnk tube port and put the ink tubes from the printer into the tanks and screw up the Ink tube port tightly . The end of the tubes should not be lower than Min. 1evel .

4. Pour the inks into the tanks . (One color ink into one tank) And turn on the switch on the back of the machine .

3. Connecting the temperature controlling and power cable correctly . (Refer to the assemble diagram)

2. Clean the inner part of the tank with solvent . Avoid liquid flow into the bottom part of the tank .

1. Put this machine to the place where is facilitate to put the ink tubes into the tanks . Please keep the place dry and ventilation .

Start to use :

Ink temperature alreadly setted between 26--38.

Timer set : Has been set in factory. User dont need to set it again.

Assemble Diagram :

120Min.Ultrasonic  10Min(With thermostat)

Ultrasonic 10Min.Suspending

Running Formula :

Temperature of the ink26--38.

Ultrasonic running formula : RUNING for 10MIN  SUSPENDING for 120MIN

PowerAC220V  4A  50HZ

Technical parameter :

Ultrasonic Ink Supplier

INK TANK series products could solve the problems of sedimentation and aggregation of the pigment in the solvent ink with the special feature of ultrasonic . This kind of problem cannot be solved by any mechanical method . Keeping the ink temperature in best range could consist the viscosity and surface tension of the ink that is very important parameters for digital printers.The advantage of INK TANK is particularly obvious in winter or the environment temperature lower than 25 .

INK TANK SERIES products including Ultrasonic Ink Supplier , Ultrasonic Tank , Thermostat Tank and Ultrasonic Combined Thermostat Tank .

INK TANK SERIES products including Ultrasonic Ink Supplier , Ultrasonic Tank , Thermostat Tank and Ultrasonic Combined