Refill ink

Paul Jeon

Best regard

Thank you.

If you have a question, feel free contact me.

We are looking for the distributors in the world as exclusive and can send the sample to you (By Collect)

Valid for 24 months from the date of production.

Keep the product at the room temperature.

Storage

3.    To remove ink stains from hands or skins, immediately wash with abrasive soap using cold water

2.    Do not drink the ink. If incidentally drink, see the doctor immediately.

1.    Keep out of reach of children.

Note

2-3. avoid touch the nozzles.

2-2. clean out-surface of cartridge using paper.

2-1. place the Cartridge on the dried tissue paper with the nozzle plate contacting with paper for 1-2 minutes.

2.    In case of ink over flow;

1.    An error message is appeared, ignore it and reset your printer and run printing work.

Trouble shooting

3.      Install the cartridge in the printer and run cartridge cleaning process before print works(or follow the steps of Aligning of new cartridges of your printer).

2.      Slide down the sleeve of ink cylinder and turn it rightward as its initial position. Keep the Cylinder rocked so ink will not dry out.

1.      After remove air-pump kit from cylinder, do not remove the cylinder of refill kit from the cartridge at least for 10 seconds.

Step 3  : Removing Refill kit

During the procedure, observe carefully graduation line of ink cylinder and when the desired amount of ink is refilled, remove air-pump from the cylinder.

For rapid refilling, pump air into the cylinder by pumping rubber Air-pumping kit using thumb and forefinger for 1-2 times so that a number of inks can be injected into the empty cartridge and leave them so that the ink can be refilled in a way of natural drop refill system.

Insert needle of Air-pump into the center of upper Cap of Cylinder. From now, ink is refilled slowly and naturally(without any external force). If ink is refilled fully into empty cartridge, refilling of ink is stopped automatically and no more ink is injected. This procedure will take for about 100~120 seconds.

3.    Refilling

Insert Needle deeply into the empty Cartridge through the inlet point of each color indicated on the Sticker. Color of each refill ink must match to the color of inlet point indicated on the sticker.

2.    Inserting Needle

Turn the Sleeve of ink Cylinder leftward until the sleeve reaches the end and slide the sleeve of ink cylinder up to the end so that the Needle can be generated.

1.    Generating Needle

Step 2  : Refilling Procedure

2.    Firmly attach the enclosed Sticker(silicone pad) print-side up on the exactly same position of the label(sticker) of empty cartridge. The figure & pattern printed on the silicone pad must match the figure of label of empty cartridge.(Use Black colored Silicone pad only for Black cartridge).

1.    Before refilling process, place empty cartridge on the wet tissue paper with the nozzle contacting with wet tissue paper for 1~2 minutes. It helps to restore dried nozzle to normal. Check whether inks are strained on the wet tissue. If not, do not use the empty cartridge for refilling. Cartridge might be damaged.

Step 1  : Preparation

Instructions(Refilling Procedure)

Rubber Sticker 2ea (for Black 1ea, for Color 1ea)

Air Pumping Kit 1ea

Ink 9ml x 4ea (Black, Cyan, Magenta, Yellow)

Contents

l  High yield printable.

l  No blocking of printer head and nozzle.

l  Great for photo and business documents.

l  Superior color expression and shinny glossy

l  Ultra color performance and fluent printing.

Quality Ink

l  Cost effective and time effective by no waste of ink, less components of refill kit and simple procedure.

l  9 ml of InkFree color refill kit ink can refill 3 x empty cartridge(3ml) perfectly without any waste.

l  After refilling, inside of kit remains tightly covered and sealed and it helps to avoid drying of remaining ink.

l  No washing & cleaning of refill kit is needed.

Economical solution

l  Perfect solution of Needle blocking problem caused by drying or curdling of residual ink which is remained in Needle after refilling. Injection Needle is placed in internal of Silicone cap, it helps to avoid dry and curdle of ink because of no contact ink with air.

l  No need cleaning and washing Needles after refilling procedure.

l  No contamination and no messy leaks during refilling procedure.

l  Natural drop methods refill system avoids Ink over-flow.

l  Refilling speed is adjustable and two optional methods of Ink refilling are available. 1)Natural drop refilling and 2)Forced pumping.

l  Injection Needle is pre-attached. Customer does not need to assemble and to separate needles before and after refilling procedure.

l  Simple structure of InkFree refill kit reduces refilling procedure.

Clean & Convenient

Features and Characteristics

Is your inkjet cartridge empty? Then you get InkFree refill kit and enjoy printing.

InkFree Refill kits are manufactured to the highest standards available to ensure customers satisfaction.

You have nothing to worry about getting dirty and being spoiled with over flown ink during the process of refilling. An unique and innovative special design of InkFree refill kit will help you to refill cartridges easy, quick and clean even if you have no experience in refilling inkjet cartridge.

InT's InkFree inkjet cartridge refill kit allows you to refill your empty ink cartridges simply and conveniently.

UNIQUE SOLUTION FOR QUICK-CONVENIENT-EASY-CLEAN REFILL

SUPERIOR COLOR EXPRESSION & HIGH YIELD PRINTING

* The New and Unique Solutions in Refill ink
- Quick - Convenient - Easy - Clean
*Patent No 049626