Note: the above test result data of the resistance are under testing condition of our company; please note that this can? be regarded as guarantee to the actual use.
Test was done when the object was placed under room temperature for one week after the heat drying.
Dried by Heat65?C?5mins
Printed on1.3mm PP
Tested Printing InkC-68-K01black 783 solvent 15%thinner Added 10% of c-68-900 hardener
The heavy metal contents of the basic and four-color ink of this series meet the standards of EU ROHS and American ASTM F963-07.
Specification
Soaked in 5%NaCl X 24Hrs
No abnormalities
Salt resistance
Soaked in 5%NaOH X 24Hrs
No abnormalities
Alkali resistance
Soaked in 5%HCl X 24Hrs
No abnormalities
500g/5 cm2 load #97alcohol X 300Roundtrips
No abnormalities
Alcohol resistance
500g/5 cm2 load #97gasoline X 200Roundtrips
No abnormalities
Gasoline resistance
Soaked in tap water X 24Hrs
No abnormalities
Water resistance
?1/2" X 500g X 50cm
No abnormalities
Impact resistance
1mm X 1mm X 100 apertures peel off with 3M gummed paper
OK
Adhesion
China plot pencil 500g X 45?C
H
Rigidity
Test conditions
Test results
Test items
4. Technical parameter:
2Under 65?C temperature: 5-10mins for surface drying, and within 1Hr for full drying
1) Under room temperature: 20-30mins for surface drying, and 8Hrs up for full drying.
d. Drying/Hardening time
C. Suitable for: the printing of stencil 150-350T.
b. Please choose one of the thinner ranged in fast, middle and low drying speed according to the actual working environment. The dosage of thinner is within range 10%-20%; please adjust according to actual use requirements.
Mixed printing ink must be used within 8 hours, otherwise can? be used again because of the hardening of the ink. Please mix the ink according to the actual quantity, so as to avoid any waste.
C-68 white color ink: printing ink: hardener=100:8
C-68 colored inks: printing ink: hardener=100:10
a. Because C-68 ink series is double components interacting ink, so it is a must to add the hardener and mix it fully before you use it. The proportion is listed below:
3. Usage
2. Characteristics: C-68 ink series has good adhesion to all kind of materials. It brings good coating function even under low temperature and high temperature drying, has excellent printing applicability, and you can get fine lines with it.
1. Application scope: Treated or untreated PP, PE, PVC, ABS, metal, glass, plated coatings, baked lacquer coatings, PU coatings and other materials that is difficult in adhering.
C-68 Series Printing Ink
( C-68)
Refillable yellow ink cartridges are replaceable components of an inkjet printer that contains the ink that is deposited onto paper during printing. Print-Rite discount printer cartridges refill usually consists of a housing, a small reservoir, and a printing mechanism. ...
Come From Print-Rite Unicorn Image Products Co., Ltd. of Zhuhai
PET heat transfer fim paper for screen printing includes the polyester release film by gloss and matt, super matt finished. Screen print plastisol heat transfer paper is suitable for plastisol ink, water-based ink, silicone ink, and sovent based ink. There are both sides ...
Polyester transfer release film is release coated pet film (PET release film) that is coating silicone on pet film which is used as hot peel or cold peel transfer. It can be screen printing, digital printing and litho printed silkscreen transfer. Compare with the release paper, ...