- XGA (1024 x 768) resolution
- Exceptional Brightness: 3400 ANSI lumens
- Convenient Auto Focus
- Innovative Auto Wall Colour Correction
- Wired and Wireless LAN Capability
- 3D Reform Correction for Unrestricted Installation Layout
- The Auto 3D Reform automatically adjusts image size to screen size
|
- Comprehensive Array of Input/Output Terminals for Immediate Connectivity
- DVI Input Support
- Long Life Lamp: 4000 hours (with optional MT60LPS Extended Life Lamp)
- Quietness: Less than 29 dB (with optional MT60LPS Extended Life Lamp)
- Short Focus: Throwing distances are 100 inches at 3m and 60 inches at 1.8m. (Zoom ratio = 1.35)
|
|
|
|
|
|
|
With the innovative built-in image sensor, the first of its kind in the industry *1, Auto Focus and the Auto Wall Colour Correction*2 have been realized.
|
Introduction of the 2-D image sensor enables the Auto Focus and the Auto Wall Colour Correction to automatically adjust the focus and colour tone of projected images with just the
press of a button. Images are bright and clearly focused even when projected on a lightly coloured wall.The Auto Focus projects a focus pattern on the screen at first, then
automatically adjusts the focus by capturing the image with the image sensor, turning the focus lens, and judging the point when the edge of the pattern image is most clear.Auto
Wall Colour Correction is a technology for correcting W (White), R (Red), G (Green) and B (Blue) by using a new colour correction application technology unique to NEC and the image
sensor. This will first project a test pattern in W (White), R (Red), G (Green) and B (Blue), and then the respective colour conditions will be detected with the image sensor. This
reproduces the colours as close as possible to the original colour by detecting differences in the projected colour and the original colour, and then making the reverse
correction.
|
|
* 1: As of September 2002 (Researched by us)
* 2: This function is available for projection sizes of 40" to 150". Depending on the room brightness or screen conditions, proper performance may not be obtained.
|
|
|
The 3D Reform for projecting from an angled position and the Auto 3D Reform automatically correct images.
|
|
With the newly developed chip from NEC, the 3D Reform function corrects 3D distortions not obtainable with ordinary four direction trapezoid correction (top and bottom, right and
left) and is capable of projecting more vivid images. When a distorted image is projected, make the correction simply by setting the four corners. *1 Since it is possible to project
from a position of projection angles up to 40 degrees vertically and 34 degrees horizontally, you can install the projector anywhere it does not obstruct your presentation, in
contrast with ordinary projectors that had to be installed in front of the screen. Flexibility of projector position is dramatically expanded. Furthermore, the MT1065 can zoom while
maintaining the corrected image, and then with the Auto 3D Reform image sensor senses (recognizes) *3 the screen shape and automatically corrects the image to fit the screen. *4
|
|
|
|
This supports wireless and wired LAN. The lamp lifetime and error messages will be reported through e-mails.
|
|
|
|
|
By using the long-life lamp (optional), the lamp lifetime has a maximum of 4000 hours and generates low noise at a level of only 29 dB.
|
|
In the power saving Lamp Eco mode, lamp lifetime can be extended up to 3000 hours. With the long-life lamp for the MT60LPS, lamp lifetime can be extended up to a maximum of 4000
hours. With these features, you can drastically save costs and labour for replacing lamps. Furthermore, by introducing our unique separate cooling method and large exhaust fan, low
noise operation at a level of 29 dB has been achieved when the long-life lamp is used. (34 dB for the Lamp Eco mode, and 39 dB for Normal mode). You can enjoy images projected on a
large sized screen under very quiet circumstances.
|
|
|
The throwing distance has been shortened by introducing the short focus lens
|
|
With the short focus lens, it is possible to project images on a large-sized screen with a short throwing distance. (It is possible to project images on a screen of 100" with a
throwing distance of 3 m.) Project an impressive image even when installing the projector in a classroom, conference room, or small meeting room.
|
|
|
Three types of security functions, Prevention of improper operations, Prevention of settings changes, and Prevention of illegal use are provided.
|
|
In order to prevent unauthorized persons from operating the projector, the Control Panel Key Lock function disables buttons on the main unit and operates only with the remote
control. For instance, it can prevent improper operations by students when used in a classroom. It is also possible to keep unauthorized persons from changing the settings (the menu
and the background logo data) of the projector by using a password. Furthermore, it is also possible to prohibit anyone from operating the projector without authorization by
providing an authentication setting with a registered PC card. This is effective for preventing theft.
|
|
|
With the Viewer function using a PC card, you can make a presentation without a PC.
|
|
Since two PC card slots (PCMCIA TYPE II ATA specification) are incorporated into the main unit, you can easily make a presentation using still images, such as JPEG files, by
inserting a commercially available PC card. It is optimum for immediately projecting still images photographed with a digital camera. Since there are two slots, you can use a PC
card and a wireless (wired) LAN card simultaneously.
|
|
