Foto Seps Simulated Process Ink

Foto Seps
One Stroke Inks
Description
Foto Seps is a special line of colors formulated for use with many of the most popular simulated process color
seperation programs used in the industry today. Foto Seps colors are offered in a standard and high opacity
which allows you the freedom of losing the white underbase and trimming a 7 color job down to a 6 color job.
Excellent work if you only have a 6 color press.
Printable Fabrics
Light, medium, and dark 100% cotton and poly/
cotton blend T-shirts, sweats, and shorts. Use
on 100% nylon and 100% polyester is not
recommended.
Screen Mesh
195 to 230 monofilament screen mesh is
recommended depending on the separation
software, artwork, and equipment (automatic or
manual).
Squeegees
80 durometer or 75-90-75 triple durometer rubber
is recommended for 4 color process printing.
Flash Time & Temperature
Flash for 3 to 5 seconds with a standard infrared
unit. Excessive flash time or temperature is not
recommended. This may cause dye migration or
over-print adhesion difficulty.
Curing
The entire ink film must reach 320 degrees
Fahrenheit. Every conveyor dryer will operate
differently due to the large number of variables.
Under-cured garments will likely exhibit cracking
or flaking after washing.
Reducers
All of the inks we manufacture are ready-to-print. If
reducing is required, please add Curable Reducer,
Visco Minus, or Reducer #2 (5% maximum).
Cleaning
We distribute numerous cleaners for our plastisol
inks. These cleaners include: PW4, IR4, Franmar
Chemicals, Screen Wash, and Citrus Green.
Available Colors
PMS 102 C, PMS 167 C, PMS 185 C, PMS 219 C,
PMS 286 C, PMS 306 C, PMS 361 C, PMS 421 C, and
black.
Important Note
Always perform a pretest print and test cure conditions on the fabric to be printed to establish the best
results. Stir inks vigorously before each use. Viscosity may need adjusting for best results. If there is ever a
question about a print job, call us at 1-800-942-4447. We are always happy to help!
800.942.4447
800.942.4447

Formulated to work with any simulated process color separation software, the Foto Seps inks will give you the bright, accurate color you need for photo realistic printing on light, medium, or dark fabrics. Foto Seps are available in standard and high opacity formulas allowing for greater versatility. This ink series is availabel in white, black, and all of the standard Pantone colors for your favorite separation software