EZ Print Process Ink

EZ Print Process
One Stroke Inks
Description
EZ Print Process Series is a very creamy, easy-to-print ink for 4 color process printing on white garments
and white underbases. This new process ink has a very large color gamut, allowing for perfect reproduction
of the most difficult colors. Always utilize a white underbase when printing on colored fabrics. This ink is
desinged to be translucent.
Printable Fabrics
White cotton or white poly/cotton T-shirts and
sweats. Always print a white underbase on colored
fabrics. Use on 100% nylon and 100% polyester is
not recommended.
Screen Mesh
230 to 355 monofilament screen mesh is
recommended depending on the detail of the art
work and equipment (automatic or manual).
Squeegees
80 durometer or 75-90-75 triple durometer rubber
is recommended for 4 color process printing.
Flash Time & Temperature
Flashing process inks is not recommended. If a
white underbase is necessary, we recommend the
Super Smooth White. This ink will flash in 3 to 4
seconds.
Curing
The entire ink film must reach 320 degrees
Fahrenheit. Every conveyor dryer will operate
differently due to the large number of variables.
Under-cured garments will likely exhibit cracking
or flaking after washing.
Reducers
All of the inks we manufacture are ready-to-print. If
reducing is required, please add Curable Reducer,
Visco Minus, or Reducer #2 (5% maximum).
Cleaning
We distribute numerous cleaners for our plastisol
inks. These cleaners include: PW4, IR4, Franmar
Chemicals, Screen Wash, and Citrus Green.
Available Colors
Cyan, magenta, yellow, black, red, and blue are
available. The red and blue replace magenta and
cyan when very vivid prints are required.
Important Note
Always perform a pretest print and test cure conditions on the fabric to be printed to establish the best
results. Stir inks vigorously before each use. Viscosity may need adjusting for best results. If there is ever a
question about a print job, call us at 1-800-942-4447. We are always happy to help!
800.942.4447
800.942.4447

The new EZ Print process colors provide a wide color gamut and easy-to-print viscosity to be the most complete line of 4 color process inks in the industry. In addition to the standard process cyan, magenta, yellow, and black is process blue and red. These colors offer slightly higher color levels for further expansion of the vibrant color gamut.