Printing Oil

                                                  Typically most puff inks are printed through coarser mesh            counts, ranging from 60 to 110 monofilament polyester mesh with a 55 to 60 durometer squeegee. The coarse mesh allows a thick deposit of ink, and the softer squeegee lays down a surface print instead of driving the ink into the garment.Many more products available.Contact Mr.Sayeed Zafar

16] Puff additive:                You can directly apply or mix colours as u need.

15] Puff Base:                     Add 10-20% or as per ur requirements to get the foam lift.

                                             printdown.   

                             &bsp;               with a mixdrill for 2-3 minutes and ur paste is ready for    

                                         and ur assumpted glitter quantity and mixwell properly

14) Glitter Base Gell:          Make your own glitter colours.Take the required base

                                             the print and fabric.For more details contact us.

                                             backup   and it can easily be removed withour disturbing

                                             onto the unwanted portion will not adhere to the foil

                                             a barrier onto the next printed portion.The gell applied

13) Anti Foiling Gell:          It aids you to apply foils on the particular area by putting

f) First down inlay (cover faberation) on lycra and  print on top and color.

  e) Apply on printed color to highlight certain portions to give very glossy finish.

 d) Add glitters for high gloss look.

 c) HD type look (select proper-mesh and film)

b) Semi to mirror finish.

11) Denim Series Seri/Jn : - Print on jeans fabric. No dis-coloration (Test your fabric for inferior processing dying quality) No peel off in washing proper curing and fusing is important. Test before use.12) Color Jell (different shades) : - a) Self color look.

10)  Backup printable Adh : - a) For more extra stretch on the backup white.b) Apply on the pre-printed offset sheet and transfer on white t-shirt. No need for white when you are transferring the image on white T-shirt c) Good stretchability and wash fastness.

9)      Backup White Litho : - Applying backup opaque Litho White Adhesive onto the pre-printed offset transfer multicolor sheet excellent opacity bond stretch and transferability.

8)      Process highlight white: - Print onto the specially cutout highlight needed in multicolor effect.

7)      Process CMYK Litho inks (PVC free) wet on wet.

6)      Process BRYK for deeper photo effect.

5)      Process CMYK for soft finish photo wet on wet.

4)      High stretch series for transfer producing.

3)      High Opaque performaning higher opacity for darks.

2)      Super series opacity to extent.

Serflex wide range of products: