Athletic Screen Printing Inks--Nylostretch Series

Nylostretch
One Stroke Inks
Description
Nylostretch is our most stretchable plastisol ink, perfect for track and wrestling singlets. When properly
cured, the Nylostretch inks will stretch many times its own length. These prints are long-lasting and durable.
No additives are needed for adhesion to any of these untreated nylon/lycra or nylon/spandex blends. Not
for use on polyester blend fabrics.
Printable Fabrics
Light, medium, and dark nylon/lycra or nylon/
spandex blends. Adding a nylon catalyst is not
recommended. This will prevent the ink from
stretching well.
Screen Mesh
86 to 110 monofilament screen mesh is
recommended depending on the detail of the art
work, color of the ink, and color of the garment.
Squeegees
60, 70, and 80 single durometer rubber is
recommended for most applications.
Flash Time & Temperature
Flash for 5 to 6 seconds with a standard infrared
unit. Excessive flash time or temperature is not
recommended. This may cause dye migration or
over-print adhesion difficulty.
Curing
The entire ink film must reach 320 degrees
Fahrenheit. Every conveyor dryer will operate
differently due to the large number of variables.
Under-cured garments will likely exhibit cracking
or flaking after washing.
Reducers
All of the inks we manufacture are ready-to-print. If
reducing is required, please add Curable Reducer,
Visco Minus, or Athletic Reducer (5% maximum).
Cleaning
We distribute numerous cleaners for our plastisol
inks. These cleaners include: PW4, IR4, Franmar
Chemicals, Screen Wash, and Citrus Green.
Available Colors
A full selection of colors, white, and custom colors
are available. Provide a Pantone number, ink
swatch, or material sample for matching.
Important Note
Always perform a pretest print and test cure conditions on the fabric to be printed to establish the best
results. Stir inks vigorously before each use. Viscosity may need adjusting for best results. If there is ever a
question about a print job, call us at 1-800-942-4447. We are always happy to help!
800.942.4447
800.942.4447

Very similar to the Polystretch Plus Series, the Nylostretch is formulated specifically for the spandex and lycra blend nylon uniforms where bleed resistance is not required. The ink cures extremely stretchable, flexible, and durable. No additives are needed for adhesion. The same rules apply: print with an 86 or 110 mesh to allow for the most flexible print possible

the Nylostretch is formulated specifically for the spandex and lycra blend nylon uniforms where bleed resistance is not required