UV water based crystal varnish

3 ) Please pay attention to use water based diluent to adjust viscosity when add color powder . If not , it will affect quality .

2 ) Printing products must be curing deeply in order to avoid the quality .

1 ) It must be test before manufacture ,confirm quality and then printing .

Notices :

4 ) Please clean the mesh plate with cleaning agent when sealed . After evaporate fully and then to start printing .

3 ) To choose add 8-10% water based professional diluent to adjust viscidity and proper meshcount to printing when add color powder . Furthermore , choose 60-90 meshcount to printing according to color powder fineness .

2 ) Churned up adequately before use . Stop 3-5 minutes and then printing . Please seal & store after finished .

1 ) IR drying (120) ,Curing speed 10-15m/min or drying 20 minutes in nature.

Instructions :

4 ) Diluent : Water based professional diluent .

3) Printing meshcount : 60 mesh .

2 ) Curing speed : IR 120,10-15m/min or 20 minutes in nature . 

1 ) Surface : Ivory semi-fluid mass .

Technology Data :

1 ) Water based ink do not include organic solvent . Its environmental protection .
2 ) Good flexibility and excellent adhesion