Sublimation Ink For Offset Printing Machine

(1)If print red PS-plate, the proportion is 100% magenta and 35%-40% yellow. If print green PS-plate, the proportion is 80% cyan and 90% yellow. (2)If print Asian-yellow PS-plate, the proportion is 10-12% magenta and 7-8% yellow and a little cyan.

6.    Often we produce the samples before use. If little deviation, then determine the final product to be printed. Because sublimation offset ink is used for gas shading, the printing ratio should not be printed by ordinary plate-making.

(5)            To reduce the glutinosity and liquidity, can add 52-94, the dosage is 0-5%.

(4)            To reduce the glutinosity and keep liquidity unchanged, can add reducer.

(3)            To adjust liquidity, can add 6# printing varnish, the dosage is 0-5%.

(2)            With specialized dilute pellicle.

(1)            To speed up the drying, can add mixed desiccant, the dosage is 0-2%.

5.    Attention: Because of temperature, paper, print speed and other factors, may adjust the use method as following rules:

4.    Use Method: Under normal condition, directly use on the offset machine.

3.    Pattern: HD-magenta\yellow\cyan\black

2.    Product Characteristics: Good ink balance, restore points clear, fast fixation, good stability on the machine.

1.    Use scope: Applicable to single-color, two-color and multi-color   offset printing machine which supply single paper once. Print materials as follows: chrome paper, coated paper, offset paper, cardboard.

It is used on offset machine. With the ink, first print the pattern on paper, then transfer print the pattern onto various materials by heating, especially for polyester and nylon fabric.

                              Sublimation Ink For Offset Printing Machine

Sublimation Ink For Offset Printing Machine
heat transfer printing offset ink

try printing machine    sublimation ink    to get through more products