Best regards, Galymbek Baimakhanov, Technical manager. Company OMK Industries, The Republic of Kazakhstan, Almaty, Tel: +7 (727) 2923179, fax. +7 (727) 2926529, Mob: +7 7772040185, E-mail: , ICQ: 382-201-659,
IV. The Factory (Shop) on processing and conservation of various vegetables and fruit, average productivity (capacity). On the basis of a proposed vegetable storehouse, we wish to establish shop on processing and conservation of various vegetables and fruit. Probably, the following of the equipment will be necessary: 1) Line on manufacture pickled cucumbers, tomatoes: overturning containers; calibrating cucumbers; brush washing (sink); ventilating washing (sink); inspection conveyor; supply of cucumbers; station of preparation gulfs; filler gulfs; egalizator; vapor-vacuum machine twist off; buffer transport table; a tunnel pasteurizer-cooler. 2) Line of processing of vegetables for preparation pickled salads: the universal car for cleaning vegetables; machine of steam clearing with blade elevator; scoop (ladle) blashirovater; machine for cabbage; a universal vegetable cutter; machine for are sharp pepper on strips; machine for are sharp root crops on strips; machine for are sharp (cutting) cucumbers; the machine for hashing salad; filler salad. 3) machines for washer (sink), pouring, packing and warehouse operations: machine for washer of the bottles; the machine for tin-plate bank; the machine for drying container (tare); labeling machine; packing in film, etc. Can offer for us and other process equipments on release of similar production. On productivity (capacity) of a technological line we completely were not defined, as we should learn cost of the equipment and our potential on maintenance of concrete production - raw material and realization of let out production in the market. Thus, give under this project offers with advice on similar manufacture and according to characteristics and conditions.
According to the analysis on the equipment for vegetable storehouses, depending on type of production exists two variants of reconstruction of storehouses: the first assumes installation of the ventilating equipment, the second-refrigerating (dear pleasure), also provides storage in containers and storage in bulk production. Our requirements on a vegetable storehouse following: 1) The Equipment it should be equipped in one of above-named a building; 2) We should store such fruit-and-vegetable cultures which have similar (identical) conditions of storage, i.e. in the general microclimate. In this respect offer your variants as we do not want separately for different fruit-and-vegetable production, to equip different equipments, it is unprofitable. Thus, give us the offer with characteristics on the equipment (the fan or a refrigerator) for a vegetable storehouse of various fruit-and-vegetable cultures (a potato, cabbage, carrots, an onions, tomatoes, cucumbers, a beet, apples) and conditions of storage. Now we unequivocally not can tell how many the tons, what fruit-and-vegetable culture we shall store and in what volume. Offer your versions that is profitable to place what fruit-and-vegetable cultures in a vegetable storehouse. We plan to create a vegetable storehouse from a position lessor (we shall serve) that clients (wholesalers-jobbers or farmers) placed and stored fruit-and-vegetable production, renting-leasing ours a vegetable storehouse, also we shall use the some people stored fruit-and-vegetable products (probably a few bad products), as raw material for our shop on processing and conservation of vegetables and fruit. Please, in the offer specify profitability and a time of recovery of outlay of a vegetable storehouse, costs (price) of the equipment and materials, conditions the chief - installation, starting -adjustment and training and a condition of packing and deliveries (transportation) Almaty area (a site of a factory).
III. One of projects of our company this construction of a vegetable storehouse. We have a premise a three-floor building and a hangar - for the industrial purposes. I think, on a ground floor, in a cellar, there will be a vegetable storehouse, and on the top floors factory (shop) for filling of water or factory (shop) on manufacture of liquid soap, on an average floor shop on processing and conservations of vegetables and fruit or probably to place one of projects on manufacture in a hangar.
II. The Factory (Shop) on manufacture of liquid soap (liquid washing facility). Us the equipment for manufacture of liquid soap 100-200 l/ hour interests. I think, for completeness of the complete set of a technological line the following of the equipment are necessary: a reactor 1000 l; the tank technological 1000 l and 2000 l, pumps for viscous products; homogenizator, filling line of liquid soap ( and others); pipeline armature, etc. All Is desirable full these data specify in the offer.
I. The Factory (Shop) on manufacture drinking not aerated and soda water (bottles water), a site in Almaty area from a chink: A) Blow Moulding Machines (the compressor and chiller, the complete set of compression moulds, etc.) PET-bottles, productivity of 3000 bottles/hour (5000 bottles/hour- for example) for a base format - the size 1,5 l (in parallel for formats from 0,2 up to 2 l). We shall consider technologies on a monostage injection blow moulding way (from PET-granules up to ready PET-bottles, it is possible and for a bottle under liquid soap) or twostage blow moulding way (from PET-perform up to ready PET-bottles). B) The Equipment for system of water-preparation and a filtration of water (water-purifying filters (mechanical, chemical, bacteriological, ozonization, etc.)) from drilled chinks. C) the equipment on filling of water (monoblock washing rinsing-filling-capping), productivity of 3000 bottles/hour (5000 bottles/hour- for example) for a base format - the size 1,5 l (in parallel for formats from 0,2 up to 2 l). D) Optional equipment and complete sets: system of conveyors for transportation of empty and hollow bottles and packing, CIP-sink (it is possible), the automatic central greasing, cooling installation for water, heat exchanger, saturator (installation deaeration and saturation (carbonization (CO2)), mix saturator (probably), carbonate station (balloons-cylinders with CO2), labeling machine, dating machine (marking equipment, the encoder), packing machine with thermo film (shrink wrapper for PET bottles), palletizing, the compressor, a recommended set of spare parts and other additional equipments. E) Conditions the chief - installation, starting-adjustment and training. F) Conditions of packing and deliveries (transportation) Almaty area (a site of a factory).
Our company OMK Industries, of Almaty, Kazakhstan, intends to create a number of projects in Almaty area: plant (shop) on manufacture drinking bottle waters, plant (shop) on manufacture of liquid soap, vegetable storehouse and plant (shop) on processing vegetables and fruit (conservation). We have for these purposes ground and in the same place a three-floor building and a hangar for industrial activity and to functioning of the given projects. We consider offers from Suppliers of the equipment variants of crediting and leasing or it is possible from commercial banks and the state enterprises (for example, KazAgrofinans) as mortgaging property for us are available (the ground and buildings). For realization of the given projects us the price (if probably typical business-plan), technology, productivity, energy need, quantity of the attendants, a complete set, conditions of delivery and installation and so forth interests:
plant (shop) on manufacture drinking bottle waters, plant (shop) on manufacture of liquid soap, vegetable storehouse and plant (
Delivery Time: | 12.2009 |
Package: | others |
Supply Ability: | 1000 Bag/Bags per Day |
Minimum Order Quantity: | 1000 Bag/Bags |
Payment Terms: | L/C |
Port: | Almaty |
FOB Price: | US $100,000 - 1,000,000 |
Vapor phase liquid nitrogen freezers are suitable for the cryopreservation of large quantities of biological samples such as stem cells, embryos, vaccines, etc. They are made of low-temperature resistant stainless steel, have large capacity and are easy to operate. They are ...
Vapor phase liquid nitrogen freezers are suitable for the cryopreservation of large quantities of biological samples such as stem cells, embryos, vaccines, etc. They are made of low-temperature resistant stainless steel, have large capacity and are easy to operate. They are ...
Come From Tianchi Cryogenic Machinery Equipment Manufacturing
Pressurized liquid nitrogen container is a device for storing and replenishing liquid nitrogen. It is made of stainless steel and can generate pressure inside to achieve continuous discharge to achieve the purpose of replenishment. It is widely used in animal husbandry, ...
Come From Tianchi Cryogenic Machinery Equipment Manufacturing