No. 1 Premium Acrylic Distemper

Heres why its No. 1 :Copolymer emulsion based; Smooth finish; Fast drying; Quick recoatable; Clean bright shades. Area Of ApplicationInterior surfaces of plaster, Concrete/ Brick Work, AbestosProduct DataFinish Smooth & Matt Supply Viscosity Smooth paste Average Coverage Capacity 180 -200 Sq.ft per kg per coat (on primed & puttied smooth surface by brush application) Surface Dry : Within 20 minutes (at 30+/- 10 C & 65+/- 5% R.H) Interval between coats 3 hour minimum Thinner recommended Clean tap / potable water Primer recommended For New Plaster Shalimar Wall Neutralising Cement Primer, For Old Painted surface Shalimar Water Tinnable Cement Primer, Universal White Primer Directions For UseSurface PreparationEnsure the substrate is dry and free from dirt, dust, grease, oil and loose matter.Method Of ApplicationAfter proper Surface preparation, No. 1 Premium Acrylic Distemper can be applied with Brush/ Spray or Roller. After Application of suitable primer, two or more coats of No.1 Premium Acrylic Distemper to be applied allowing an interval of 3/4 hours between subsequent coats. The dilution ratio with water should be 100:70 by weight.Shades AvailableChoose From a wide range of shades from our shade card.Packs Available1 kg/ 2 kg/ 5 kg/ 10 kg/ 20 kg