Facial Steamer with Ozone S-202BS

7.  If refill of distill water is required, be sure to turn the machine off and jar is cool before filling.

6. Mask sure the steamer is off and cool before cleaning.

5.Do not touch or remove the glass jar when machine is in use.

4.When water is over the warning line, boiling water may splash out from both spray head and glass jar.

3.The water filled in the glass jar must be distill water only.  No other product or liquid (e.g. essential oil) can be added.

2 If steam too long, skin may become dry.  If steam too close, skin may feel too hot.  Do not turn ozone on for sensitive, capillaries and pigment skins.

1.When perform facial steaming, client may feel breathless or hard to breathe if spray steam directly towards nose.

Cautions:

3.Do not lose the rubber band on top of the glass jar.  It is used to prevent water spilling out.

2.Clean residues from heating element by using clean distill water and soft clothe.  Do not use any metal or abrasives.

1.Glass jar and heat element should be cleaned at least once a week with distill water.

Cleaning instructions for facial steamer:

N

10

30cm

Pigment

N

5

35cm

Capillaries, Inflammation

N

5-8

35cm

Sensitive, Sunburned

Y

3

30cm

Dry, De-hydrated, Mature

Y

10

25cm

Normal

Y

8-10

20cm

Acne, Blemish

Y

5-8

20cm

Oily, Combination

Ozone

Duration (Mins)

Skin Types

8.For safety purpose, the machine will automatically shut off when water level is below the heating element.

7.If it is needed to stop steaming during operation, turn power and ozone switches off

6. Unplug power socket and wait till the glass is cool before removing it from the machine.

5. After finishing, turn ozone off first, then power.

4.Position steam jet to aim at clients chin and steam should travel over his/her entire face.

3.Turn ozone (S2) on only when steam comes out.  Ozone indicator (S4) should light up.  Do not turn ozone on when there is no steam.

2.Connect power plug. Turn power on (S1), power indicator (S3) should light up.  Steam will come out in around 10-15 minutes after the power is switched on.

1.Fill the glass jar with distill water only through water funnel (S5), do not exceed the red warning line.  Make sure the jar is attached firmly and perfectly to the steamer.

Adjust the height of steamer. Be careful of bumping.

Operations:

The facial steamer is used to clean the skin thoroughly by opening the pores in order to remove impurities (like blackheads, whiteheads, make up, etc.) and generally revitalize the skin.  The addition of ozone enriched steam helps to promote a more sterile environment for further treatment of the skin.

Introduction:

 Facial Steamer with Ozone S-202BS

Facial Steamer with Ozone
1.Chrome cylinder spray head ;
2.Ozone feature
3.Accelerates metabolism ;
4.CE

try facial steamer    to get through more products