CO2 Fractional Laser System

Can adjust the Frequency from 300 to 950 HZ

Power: From 1 to 30 Watt can adjust.

   UNDER "NORMAL" MODE SITUATION

C: Laser Power can adjust from 1 to 10 level

 

B: Dot Space: This means the distance of the Dot each other. from 1 to 10 can adjust. 1 is the most dense. and 10 is the most sparse

 

5 times scanner shot.

A:  Dot Cycle: This mean the scanner times on the treatment area. normal one time scanner is ok.. and also if need more time scanner on same treatment area. You can choose from 1. 2. 3.4.5 times scanner.. The Maximun is 5 times.. This times mean laser shot one time. but the scanner emmit the light on same area

 

UNDER "SCANNER" MODE SITUATION:

Our Fractional laser machine another good points:

Memo

220V / 110V  available

Input Power

yes

Part of the skin regenerate

Yes

Whole skin regenerates

Yes

Whether has the polished function

yes

Whether have cutting function

Colorful Touch Screen

Interface

CW, Single & Ultra Pulse

Laser Mode

Minimum3X3 mm  Maximum20X20 mm

Spot Size

Square & Circle Adjustable

Scanner Shapes

Scanner

Laser Delivery

30W, up to 300MJ / MTZ

Laser Output

10600nm

Laser Wavelength

Carbon Dioxide Fractional Laser

Laser Type

Pixel CO2 Fractional Laser Specification:

Before & after pictures

(Maximum size:20x20mm2,  minimum size: 3x3mm2). This technology offers a full range fractional laser treatment options for all kind of skin types. It can reduce the treatment time and also reduce the pain during the fractional laser treatment.

l        Smooth wrinkles around the eyes and acne scars
Rejuvenate your neck, chest and hands

l        Erase unwanted brown spots
Adjustable size of the microscope laser spot technology

l        Easy and fast treatment, no down time

l        Wide range application, effective treatment;

l        Improve texture, tone and pore size

l        Particular designed intelligent laser control system ensures a precise treatment;

Pixel CO2 Fractional Laser Benefits of machine:

Sun damage recovery

Remove intractable chloasmas and pigmentation

Smooth burnt scars and surgery scars, etc

Acne and acne scar removal

Wrinkle removal, skin tightening

Skin renewing and resurfacing

Pixel CO2 Fractional Laser Treatment scope:

Collagen denatured between 300-750 microns

Rapid re-epithelization (within 24 hours)

Extrusion & Replacement of damaged tissue

RESURFACING:

Multiple 70-150 micron Micro Thermal Zones (MTZ) surrounded by island of viable tissue.

FRACTIONAL:

Stratum corneum remains intact.

Tissue is coagulated, not vaporized.

NON-ABLATIVE:

With a fractional non-ablative treatment, there's little to no down time - most patients may resume their daily activities immediately. For fractional ablative treatments, depending on the level of treatment provided, patients may be able to apply make-up and resume their normal schedule and activities within four days.

RECOVERY:

For best results and to prevent complications, all patients should strictly follow their post-treatment care protocol. Cool, moist compresses applied immediately post-treatment may soothe the treated skin. A neutral, occlusive ointment may be applied until the skin re-epithelizes. Cool packs used after treatment may provide comfort, if necessary. Soaking and gentle cleansing may aid exfoliation as new tissue replaces old tissue. For two weeks following treatment, avoiding sun exposure is important.

PRECAUTIONS:

Immediately following the treatment skin may be mildly red (erythema) and swollen (edema). These effects are normal, and indicate a successful treatment. Any swelling typically subsides within a day, and most redness dissipates within a few days. For ablative procedures, light superficial bleeding and oozing may occur. As the redness and swelling subside, a brownish bronzing effect will become visible. The bronzing will fade over the next few days as new, healthy skin replaces the laser-treated tissue. Other side effects may include discharge, crusting or scaling, and milia - these too typically resolve within one week.

POST TREATMENTS:

The number of treatments necessary will depend on the condition being treated, and if it is an ablative or non-ablative procedure. It may take four or five non-ablative treatments to achieve the desired results, where most desired results can be realized in a single ablative treatment. Patients should consider how quick they would like to see results and how much down time they are willing to experience when deciding on what type of treatments to have.

NO. OF TREATMENTS:

Fractional laser skin treatments are far more comfortable than traditional laser treatments. Some patients have described the feeling following a non-ablative procedure as a mild sting, not unlike sunburn, that diminishes following the treatment. Ablative treatments typically require a light topical anesthetic before the procedure, and mild post-treatment pain management.

COMFORT:

Please check our new technology co2 fractional laser with scanner

  • skin resurfacing:beauty machine
  • beauty equipment:co2 skin resurfacing
  • fractional laser:medical equipment
  • co2 fractional laser:co2 laser
  • Model Number:FBL-Pixel
  • Brand Name:FBL
  • Laser Type:CO2 Laser
  • Type:Laser
  • Country:Hong Kong
  • telephone:86-10-69351193
Delivery Time: 7 to 10 working days
Package: wood box
Supply Ability: 50 Set/Sets per Month
Minimum Order Quantity: 1 Piece/Pieces
Payment Terms: T/T,Western Union
skin resurfacing: beauty machine
beauty equipment: co2 skin resurfacing
fractional laser: medical equipment
co2 fractional laser: co2 laser
Model Number: FBL-Pixel
Brand Name: FBL
Laser Type: CO2 Laser
Type: Laser
*Your name:
*Your Email:
*To:Forever Beauty Laser Science & Technology Development Co., Ltd.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Laser Scanning System From Han's Scanner

Laser Scanning System From Han\'s Scanner Han\'s Scanner focuses on scanning galvanometer system solutions. Our products include Ultragalvo photoelectric scanning galvanometer, Extragalvo grating scanning galvanometer, 3D scanning galvanometer, etc., focusing on galvanometer ...

Come From Shenzhen Han's Scanner S&T Co., Ltd.

5-axis Laser Micromachining System

The ordinary laser drilling system can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole processing. Besides the standard straight hole and the taper hole processing, the 5-axis laser micro machining system can also process the ...

Come From Shenzhen Han's Scanner S&T Co., Ltd.

Laser Scanning System From Han's Scanner

Han\'s Scanner focuses on galvo scanning system solutions. Our products include Ultragalvo photoelectric scanning galvanometer, Extragalvo grating scanning galvanometer, 3D scanning galvanometer, etc., focusing on galvanometer and motion control system solutions, existing ...

Come From Shenzhen Han's Scanner S&T Co., Ltd.