k603

G. Precautions

5 The array is needs to be cleaned after every use by soaking in a combination of 30 parts water and 1 part of phosphoric acid of household bleach. Soak at least 5 minutes.

4 Under 50 years, OK to use it every other day for 14 continuous treatments, then stop for three weeks before starting the 14 treatment cycle. Over 50 years, OK to use it every three days for 14 continuous treatments, and then stop for four seeks before strting the 14 treatment cycle. Do dot use more than three days in a row. Do no use more than twice per day.

3 8-15 year old children must use with adult supervision for no more than 15 minutes.

2 Adults need 30 minutes per section.

[Page]

Only add a little salt at a time. Adding salt will promote the Ion Detoxification System to conduct electricity. The capability of conducting mainly lies in the waters conductivity quality. The capability of the conducting of the water determines the ion effects and impacts the function of detoxification. If the ampere readout is 1.5 amperes or below, add a little salt to enhance the capability of the conducting. But, for maintaining the machine life, please avoid adding salt.

1 Use ordinary tap water. Do not use distilled water. All water quality is different.

F. Operating instructions

1

1

1

1

1

1

1

1

Card

Warranty

Instructions

Far Infrared Waist Belt

Storage Box

Aluminum

Wrist strap

Power Cord

Array

Ion Detoxification

E. Packing list

5.You must prop up the machine with the handle while the machine is operating.

4.Be gentle when pressing the keys to protect the machine under normal use.

3.Use clean cloth to polish the dust on the machines surface, do not use any chemicals.

2.Avoid striking the machine.

1.Do not touch power while your hand is wet, please pay attention to your personal safety.

D. Attention

8. At any time, you may use the bamboo charcoal, far infrared waistband. Connect the waistband to the machine, put the waistband tightly around your belly, turn on the infrared power switch, choose mode L(low), M(medium),or H(high) to start far infrared massage

cThe current power is more than 2.5 amps.

bThe wrist strap is not wrapped in the proper way or the wrist strap is broken.

aThe array is not in the water or the array is broken.

7. In the following cases, the machine will make sounds or an error character will show on the screen.

Now input your new password, a six number password, and press (ESC). Remember your new password. The display should be the menu.

New PAS123456

ProcessOK

First, input the original six numbers, (666666) and press (ENT), this time the screen reveals:

Change Password

PASV3.0

6. To make your own password, press (3) and (ENT). and turn on the power switch.The display reads:

Press (ESC) to return to the menu.

Mins=00000

ProcessOK

The default password is 666666 then press (ENT) The display reads:

Clear Contents

PASV3.0

5. To delete the time and counter, press (2) and (ENT). and turn on the power switch. This time the screen reveals:

The first line shows total operating time, the second line shows the total numbers of times the machine has been used. When the machine has achieved 10 minutes time, it will counts as one use. Use (ESC) to go back to the menu.

93 Time

00298 Mins

4. This product has the recorded time and the number of times function. When you need to examine the record, simultaneously press (1) and (ENT) on the keypad, and turn on the power switch. This time the screen reads:

3. During initial operation, mode 3 is default. The current output is selected by choosing a different mode. The current output is as follows: Mode 1=0.6 amps, Mode 2=0.8 amps, Mode 3=1.0 amps. To select a different Mode, press (-) or (+) key. Pressing (ESC) will return to menu. Because there are differences in local water quality, it may be necessary to add a pinch of salt to the water to maintain the desired current output.

T=30 minutes time,M=3 mode three,E=1.0 current output, The instrument automatic turns off when the timer ends.

Time=06:28 pos+ positive polarity,pos- negative polarity

T=30 M=3 E=1.0

Time=06:28 pos+

Default time is Time=30 minutes. To adjust for more or less time, use the (+) or (-) key,. Press (ENT) button. The time operation is as follows

Time=30 V3.0

Enter Time 1030

2. When you turn on the power switch, the screen shown is as follows

1. To begin, plug in the power cord, the array, and the wrist strap into the machine. Next, put the array into the wash pan filled with water, and put on the wrist strap. Finally, turn on the wrist strap.

C. Operation

5 Increased energy

4 A better well being

3 Better sleep

2 Joint pain relieve from arthritis

1 Increased joint movement

B. Patients and practitioners of the system have reported many great effects from using the system. They include:

A. Product Principle:

The water is decompounded by this ion cleanse device into large numbers of energy ions (positive ions and negative ions), which can strengthen the vigor of body cells, promote the metabolism and improve the sleep quality so as to furbish the health gradually.

Operating Instructions

k603,The water is decompounded by this ion cleanse device into large numbers of energy ions (positive ions and negative ions),