Hydrox peeling system

* Main Body : 210X320X130mm, approx. 5 kg
* Cart : 300X413X805mm, approx. 20 kg
* Hand-Piece: tube length 1060mm,
     /tube diameter 2.5mm, approx. 80g
* Connection Hose: tube length 2300mm                
   /tube diameter 6.0mm, approx. 70g
* Foot-Switch: diameter 173mm, height 33.5mm
  /tube length 200mm, tube diameter 6mm approx. 600g

2. Product Components
1) Main Body : it regulates the pressure from the oxygen tank, and controls the movement of the oxygen.
2) Cart : it is a movable cart in which the main body and the hand-piece are kept.
3) Regulator : it is a decompression valve, which decompresses the high-pressure oxygen down to 10kg/mm2.  It can be connected to the oxygen tank.
4) Hand-Piece : it has a tube, which connects to the saline solution, and it jets a mixture of oxygen and saline solution at a very high speed.  There are three minute-sized injection nozzles on the jet orifice.
5) Connection Hose : it connects the hand-piece to the main body, and the oxygen is sent to the hand-piece through this hose.

Hydrox-Peel is, in general, designed for manually operated.  Due to its dual decompression device, it is now safer to use than ever before.  Also, it has both continuous and manual operation function; as a result, it offers more convenient use.

1. Product Introduction
Hydrox-Peel sprays a jet stream of sterile saline solution and compressed oxygen with controlled PSI.  The micro-sized water stream that are created by Hydrox-Peel is 5-100 microns in size, and is accelerated to a velocity of up to 200m/sec.

Hydrox Peel with using innoxious oxygen, oxygen peeling injects strongly a medicinal fluid.