Superlac Hi-Gloss Enamel

Superlac Hi-Gloss EnamelSuperlac Hi-Gloss Enamel is a premium quality Multi-Purpose interior & exterior application. It is fast drying & gives smooth excellent gloss. It also gives excellent leveling properties with a durable protection to the substrate.Area Of ApplicationMetal, Wood, Plaster Concrete, Truck/ Bus bodies, Sign board architectural jobs for both exterior and interior surfaces.Product DataFinish Smooth & Fully Glossy Supply Viscosity 105 +/- 5 seconds (by FC4 at 30 degrees Celsius Average Coverage Capacity 180 210 Sq.ft per litre per coat (on smooth metallic surface by brush application) DFT per Coat 20 -25 microns (excluding black), 15 - 20 microns (black) Surface Dry Within 4 hours (at 30+/-1 degree Celsius & 65+/- 5% R.H Interval between coats 12 hours minimum Thinner recommended Turpsol/ GP Thinner Primer recommended Universal White Primer, For Wood Shalimar Wood Primer, For Ferrous Shalimar Red Oxide Metal Primer / Shalimar Red Oxide Zinc Chromate Primer / Shalimar Red Lead Primer, For Non Ferrous : Shalimar Etch Primer, Shalimar Zinc Chromate Primer (Yellow),Plasters & Concrete : Shalimar Wall Neutralising Cement Primer Flash Point : 34 degrees Celsius (by Abel closed) Directions For UseSurface PreparationEnsure the substrate is dry and free from rust, grease, oil and loose matter.Method Of ApplicationAfter proper Surface preparation, Superlac Hi-Gloss Enamel can be applied with Brush/ Spray. For best result apply two coats of Superlac Hi-Gloss Enamel giving 12 hours of drying between coats.Shades AvailableChoose from a wide range of shades from our shade card.Packs Available50ml/ 100ml/ 200ml/ 500ml/ 1litre/ 4litre/ 10litre/ 20litre