Water Ingress Alarm System

GASSAS 06-2004 is a permanent water ingress detection system for bulk carriers fully type approved in accordance with SOLAS XII Regulation 12, IACS UR S24, IMO performance standard for water level detectors & IACS UI SC180. The system comprises of a central control and alarm panel interfacing with intrinsically safe water level detectors installed in each compartment. The system is designed for 115-230V AC main power and 24V DC emergency power supply. Emergency power supply is from vessel's emergency source of electrical power. The alarm panel has been located on the bridge. And for not to be interface with the night vision, the brightness of the visual alarms and indicators can be adjusted by a switch. The sensor is a capacitive proximity switch. The sensor is based on capacitive principal and will work in any cargo onboard a bulk carrier. The sensor is for use all cargo holds, Fore Peak Tank and Bosun Store The sensor has been constructed and tested according to IMO APPLICATION GUIDELINE valid for sensors used for this purpose. Respective alarm channels on the alarm panel have a manual override switch. The switch is to be operated when the ForePeak Tank is used for ballast in order to avoid unnecessary alarms. Audible and visual alarms are present in the navigation bridge for all corgo holds (pre-alarm and main alarm) any ballast tank forward of the collision bulkhead and any dry or void space any part of which extends forward of the foremost cargo hold. In addition to cargo hold alarms the system also indicates and gives alarm when there is an open circuit, short circuit, broken wire, earth fault in the water ingress sensor or water ingress sensors cable, processor fault or power fault occurs or if main power supply or emergency power supply should fail. For the audible alarms there are 2 types. One for pre-alarm (intermittent beeping) one for main alarm (continuously beeping). And also for fault alarms there is an audible alarm too. There are alarm relays for; upper level alarm , low level alarm , broken wire alarm and short circuit alarm. With potential free contacts for external alarm in addition to 24V DC outputs for external alarm as loop failure, power/system failure, lights and horns. The system can be delivered for console mounting or with alarm panel and electronics in one cabinet.

GASSAS 06-2004 is a permanent water ingress detection system for bulk carriers fully type approved in accordance

  • ModelNumber:GASSAS 06-2004
  • Country:Turkey
  • telephone:90-216-5755888
ModelNumber: GASSAS 06-2004
*Your name:
*Your Email:
*To:Seapart Ltd
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Purified Water (PW) System

Purified water system for pharmaceuticals adopts the latest processes such as reverse osmosis and EDI.Purified water generation and distribution system designs a complete set of purified water process in a targeted manner. The quality ofwater system in pharma company meets the ...

Come From Nanjing Biocell Environmental Technology Co., Ltd

Water For Injection (WFI) Generation System

Biocell water for injection generation system adopts an advanced three-stage separation WFI generation process of steam and water, and the quality of produced water meets the standards of Chinese, American, and European Pharmacopoeia, GMP, FDA, and other certification ...

Come From Nanjing Biocell Environmental Technology Co., Ltd

Ultrapure Water System

Ultrapure water is high-purity water produced by reverse osmosis technology, EDI electric desalting technology and other appropriate supercritical fine technology, which is used to develop ultrapure materials (semiconductor component materials, nano ceramic materials, etc.). ...

Come From Nanjing Biocell Environmental Technology Co., Ltd

Remote Cellular wireless 4g 8DI 2DO sms app alarm water level monitoring and control system

S150 is a cost-effective Cellular SMS Controller. The SMS controller features 8 digital inputs, 2 relay outputs, it can be connected to various detectors, such as water level detectors, door sensors, infrared detectors, temperature detectors, humidity detectors, water immersion ...

Come From BLIIOT

Purified Water (PW) System

System adopts the latest processes such as reverse osmosis and EDI. A complete set of purified water treatment process has been designed in a targeted manner. The quality of purified water meets the requirements of the current USP, EP, JP and ChP for purified water. ...

Come From Nanjing Biocell Environmental Technology Co., Ltd

High pressure Water Mist System for Fire Safety

The high pressure water mist system, also known as the high pressure water spray system, is suitable for class A and class B and electrical fire, such as libraries, archives, mechanical equipment, electrical equipment, high and low voltage distribution room, power transformer ...

Come From Sichuan Xuxin Technology Co., LTD

4G Solar Power PV BTS Battery SMS Alarm Monitoring System

The 4G Battery Monitoring System BMS110 suitable for Solar Power System, Telecom Tower Battery System, Computer Room Backup Power System real-time monitoring applications. When any battery voltage lower or total voltage lower, will alarm and upload data to cloud platform, SMS ...

Come From BLIIOT

SECURITY ALARM SYSTEM BATTERY

Security alarm system battery is widely used in the equipment of six major subsystems: video surveillance system, intrusion alarm system, entrance, and exit control system, electronic patrol system, explosion-proof system, and video intercom system; Great Power battery pack for ...

Come From Great Power

 SMS 4G Ethernet Remote Monitoring Water Treatment Controller Alarm Gateway

The Cellular RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, inbuilt industrial Cellular module. It provides 8 digital inputs, 6 analog(ultra high 24 bit ...

Come From BLIIOT

quick connector for water cooling system

The best plastic quick connector manufacturer in China Our company was established in 1994, and we have been focusing on injection molding technique and specialized in developing and manufacturing dust proofing products for automotive pipes since 2006. In 2010, more products to ...

Come From YongHeng Auto Parts