PIR motion detection alarm sysytem(HWPM701)

2.  Do not install near heat sources, direct sunlight or exposure to moisture.

1.  Do not drop the alarm.

The PIR alarm is a very sensitive electronic product.  For maximum long-term use please:

IMPORTANT INFORMATION:

Once the staff member has returned the patient or resident safely into bed the alarm switch must be set to either the Alarm or the Chime position for the next ambulatory attempt.

PLEASE NOTE: For patient or resident safety we have designed the alarm to continue to sound until a staff member turns it to the OFF position.

3.  Turn the alarm switch from the Off position to either the Alarm or Chime position.  Wait 20 seconds for the alarm  to warm up.  The alarm is then set to sound when it detects movement in the path of the alarms detection lens.

2.  Adjust the lens to point at desired detection area.

1. Affix or place the alarm as needed.

The operation of the PIR Motion Detection Alarm is as simple as 1-2-3:

ALARM OPERATION:

vertical or horizontal position.  Once the alarm is in place adjust the lens to cover the desired detection area.

Note the alarm can be placed in either the

If using the alarm for fall management install or place alarm at foot of bed with lens directed towards a wall.  If for wandering management install or place alarm with lens directed at door entry.  The alarm can be affixed to a wall using the wall screws included.  The alarm can also affixed to a wall, bed or other stationary object using the double-sided tape included.

ALARM INSTALLATION:           

alarm to remove alarm.  Slide open the battery cover at the back of the alarm and connect the 9-volt battery included.  Replace battery cover and wait 30 seconds before use.  Put bracket back on alarm.   

pull the ends of the bracket away from the

The alarm is attached to the bracket.  Gently

BATTERY INSTALLATION: 

                towards a wall.

4.  Provides nearly a 360 degree adjustable angle after installation.

3. Can be affixed to a wall or a bed, placed on the floor or on a table in either a vertical or horizontal position.

2. Ideal for both fall management and wandering management.

1. Wide detection area.  Easy to install and use.  9-volt battery included.

 The PIR Motion Detection Alarm is a convenient-sized, passive infrared (PIR) motion sensor alarm, which provides reliable detection all day long to assist in your fall and wandering management program.  The PIR alarm provides safety, security and convenience.  Its special features include:

1,Wide detectioin area.
2,Ideal for both fall management and wandering management.
3,Can be affixed to a wall or a bed.