Thruscan Dx Metal Detector

Storage Temperature:  -30 C / + 65 C

Operation Temperature: - 15 C / + 65 C (May be improved upon request)

When the HHMD unit is in operation the sensitivity setting should be adjusted with the Up/Down Arrow Push Buttons on the Membrane Touch-Pad. (1st Led the most and the 5th Led is for the least sensitivity level) The HHMD Unit becomes ready for detection after the auto-calibration process at start up. Press red trigger button at side to activate the instrument. Thanks to such feature, unnecessary battery usage is prevented. Thus period of usage of instrument without needing recharge is extended.

Weight ~420 g.

Yellow light and sound warning define that recharging is required when the battery is emptied.

4 mA in stand by ~12 mA during detection

Initial recharge ~15 hours, subsequent recharges 8 hours each. Directly from network 220 VAC - 5050 Hz.

1 each 9 V - 250 mAh NiMH (rechargeable and replaceable)

Sound (it may be prevented to hear from outside by using earphone) and led alarm

When sensitivity adjustment switch is adjusted to the threshold point where warning signal is not heard anymore, the instrument is in most sensitive position. Sensitivity is decreased when this switch rotated counter clockwise. When sensitivity is adjusted, it can detect a coin from 16 cm, 9 mm bullet (long) from, 9 mm gun from 35 cm.

High sensitivity and selectivity
Wide scanning area
Easy to use
Automatic frequency locking