Scout Alarm Dialer

NEMA 4X enclosure
Cell phone
Reporting to the Internet using Antx Tracking

The relay on the DS11 model can be automatically controlled when any individual or group of channels go into the alarm condition. It can even be activated on a high level and deactivated on a low level. Additionally, users can call-in to turn the relay on or off.
When equipped with the GSM cellphones, multiple Scout units can communicate with each other to perform control functions.
Options

System status can be obtained locally from the front panel, remotely over the phone or via the internet if a GSM cell phone is included.
Relay control

Dry contract or digital inputs may be monitored for on/off conditions.
Analog inputs may be monitored for high and/or low conditions.
Power failure and low battery are always monitored by the DiaLog Scout.
System status

All programming options are conveniently presented on the LCD display so you can select them using the keypad.
Call-in to make programming changes by responding to voice-prompts
Options are presented one after another making it easy to setup and modify.
Conveniently located on the front panel are the microphone for recording and the speaker for playing back messages.
Historical events including all alarms, call-outs, relay controls, and acknowledgements are stored in the Event Log which can be retrieved locally or remotely.
Alarms being monitored

Pluggable connectors
Input power 9-12VDC at 500ma (wall-plug power supply included)
12-hour internal backup battery (included)
Aluminum enclosure - 9.34"W x 7.22"H
Operating temperature - 0-70C (32-158F)
Programming made simple

Call-in for status
Call-in to acknowledge alarms
Call-in to program messages, phone numbers and channels
User control of relay (DS11 model)
Physical Characteristics

Phone, cell phone or pager
e-mail and SMS (if using GSM cell phone option)
User-recorded messages for each input
8-phone numbers to call on alarm
Power fail alarm
Low battery level alarm
Local notification of alarm conditions
Remote Operations

Integral keypad
LCD display
Panel or flush mount
Listen-In capability
Event log - keeps history of what has occurred
Data log - keeps daily reports
Motor run-times and cycles
Flow totalization
Textual channel names so you know exactly what channel is in alarm
Pre-programmed or user-spoken messages for unique alarm notification for each condition
SMS and e-mail alarm notification
Relay control between multiple Scout units
Alarm Notification

Features

Useful features that make your life easier

The DiaLog Scout also is available as an OEM product that offers additional analog I/O, serial communication and modem communication.

It's not just another autodialer! Unique features of the DiaLog Scout include local and remote programming, remote relay control, monitoring of digital and analog inputs, user programmable voice messages and internal battery backup. The Scout even calls you when it is time to replace the battery - so you will not miss those critical alarms when the power goes out. Extensive solid-state protection is provided on the power, phone and all input lines so you do not have to replace fuses in the event of power surges or lightning hits.

The easy-to-use DiaLog Scout provides a low-cost solution to remote monitoring that is dependable and reliable - everything you want in an alarming and notification system with the same performance that you expect from an Antx product.

The DiaLog Scout is a small, industrial alarm notification and remote monitoring system. It provides monitoring from either 2, 4 or 8 digital inputs, 2 or 4 analog inputs and can have a relay for control of blowers, fans, pumps, horns, etc.

Overview

Scout