Intruder Alarm Monitoring

We are NACOSS GOLD registered installers, certified to BS EN ISO 9001:2000. All our installations comply with European Standard     EN 50131-1:2004 incorporating PD 666:2004 & DD243:2004.

Upon receipt of the second alarm signal the ARC operator will upgrade the status of the alarm to "Confirmed" and proceeds to adjust the response plan accordingly. The police can be contacted at this point.

When a second device is activated within 20 minutes of the first, the incident becomes "Confirmed" and a second signal is transmitted to the Alarm Receiving Centre via a separate signal pathway.

Upon receipt of the alarm signal the ARC operator will follow an agreed response plan and contact Keyholders accordingly.

An alarm signal is sent via the signalling device to the Alarm Receiving Centre.

A full alarm condition is generated, either immediately or after a specified delay, with the siren creating 110 decibels of sound and the strobe light flashing.

Upon receipt of the alarm signal the operator at the Alarm Receiving Centre will follow an agreed response plan and contact Keyholders accordingly.

An alarm signal is sent via the signalling device to the Alarm Receiving Centre (ARC)

A full alarm condition is generated, either immediately or after a specified delay, with the siren creating 110 decibels of sound and the strobe light flashing.

Alarm devices will detect the activity of intruders. In the event of an alarm device being activated a number of events take place:-

Alarm devices will detect the activity of intruders.

  • Country:United Kingdom
  • telephone:44-01225-775666
Alarm devices will detect the activity of intruders.
*Your name:
*Your Email:
*To:Alertsystems
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

BLIIoT Network Fault Monitoring Alarm RTU5028E Control AC Contactor

The Network Fault Monitoring RTU RTU5028E is special designed for remote monitoring Ethernet devices communication status and power supply status. It can detect the Ethernet device fault caused by power supply or network communication. If network communication fault, it can ...

Come From BLIIOT

Remote Alarm monitoring data Transceiver data logger gateway RTU

The 4G Cellular M2M IoT RTU is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system, telemetry ...

Come From BLIIOT

Remote Cellular wireless 4g 8DI 2DO sms app alarm water level monitoring and control system

S150 is a cost-effective Cellular SMS Controller. The SMS controller features 8 digital inputs, 2 relay outputs, it can be connected to various detectors, such as water level detectors, door sensors, infrared detectors, temperature detectors, humidity detectors, water immersion ...

Come From BLIIOT