IP Camera with Wireless Alarm Detector (iCam33P)

ICam33P model is an Internet Protocol camera with wireless alarm detector including infra red motion detector, door/window open detector. When alarm is activated, it will be able to send out 16 photos before and after the event. The photo can be stored in the SD card, send to FTP server, email to an email address. A newly feature has just been added to the camera to SMS to two mobile phone to notify alarm being activated or someone entered the monitor area. The camera can be viewed through his/her mobile phone immediately after the alarm is activated.

Product Specification:

Hardware:
1)CPU
- True SoC
- External ROM ~ 16MB
- SDRAM ~ 16M*16
- 32 PIOs for application control
- System operation clock: 54 MHz
2)CMOS senser
- Micron MT9V011P11STC 1/4 inch CMOS sensor
3) JPEG / Motion JPEG Compression engine
- Embedded JPEG CODEC
- Built-in JPEG encoder by 4: 2: 2 and 4: 2: 0 sampling
- Supports multi-level JPEG compression ratio by changing quantization scale]
4) Network Interface
- Embedded IEEE 802.3 compliant 10/100 Mbps Ethernet MAC
5) CPU Power
- Operation voltage range: 3.3 V
- Power consumption: 420mA
6) Watchdog Timer
- Built-in hardware watchdog to reset CPU

Features:
1) Image Frame Rate
- 25~30 fps for CIF/QCIF/QVGA resolution
- 10~15 fps for VGA resolution (@20KB/frame)
2) Image Capture
- Supports up to 300000 pixels
3) Motion Image Resolution
- 640 x 480, 320 x 240, 160 x 120 (typically)
4) Image Processing
- Supports Auto Exposure (AE)
- Supports Auto White Balance (AWB)
- Supports Auto Gain Control (AGC)
- Support digital zoom
5) Network Access
- Embedded IEEE 802.3 compliant 10/100 Mbps Ethernet MAC
6) Networking Protocol
- Support ARP/ICMP/TCP/IP/UDP
- Support DNS/DDNS/DHCP
- Support Http/PPPoE/FTP/SMTP/SNTP
7) Memory Card Controller
- SD memory card storage up to 2GB
8) Security
- Support 2 levels of login control (admin & user)
- Support 2 area Software Motion Detection (realtime store in FTP, SD card or email)
- Support Hardware Motion Detection including Infra Red Motion Detector, Smoke Detector, Door and Window Open Detector
- Image can be stored in SD card, FTP to server or email to specified account
- 16 photos can be sent/stored before and after the event triggered
- Sending SMS to 2 mobile phone after alarm activiated for notification
- Realtime record and store in AVI format
- Liveview on/off for privacy control
9) External control
- 2 x GPIOs for alarm system control
- Remote upgrade
- Support outdoor mode
- 180deg image rotation
10) Night vision
- 6 x infrared LEDs for night vision
- As far as 5M distance
- Auto and manual ON/OFF